What Type of Coupler Does BlayLock Coupler BLTL-20 Fit

Question

Question:

What type of coupler does this lock fit?

asked by: Lee

0

Expert Reply:

The Blaylock Coupler Lock # BLTL-20 that you referenced is designed to fit the Bulldog Collar Lok style couplers like what you see in the picture I attached.

If you are looking for a more universal style lock the Fastway part # FA86-0015-318 is very universal and effective. It also works on Collar Lok couplers as well.

The second picture I attached shows this lock installed on a few of the more popular coupler designs.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The EZ Lock Trailer Coupler Lock #BLTL-20 is 2-5/8" from the base of the ball to the bottom of the lock pin. The EZ Lock Trailer Coupler Lock #BLTL-20-40D is available with both the coupler lock and Master Lock Stainless Steel Padlock with…

view full answer...

Answer 2

We have a solution that will work great but the part #BLTL-20-40D would not be what you'd need as it is designed to fit a Bulldog Collar Lok coupler and is only 3-3/16 inches wide. The #FA86-0015-318 would instead be what I recommend as this…

view full answer...

Answer 3

Sure thing! The EZ Lock Trailer Coupler Lock #BLTL-20 is for Bulldog Collar-Lok-style couplers while the EZ Lock Trailer Coupler Lock #BLTL-33 is designed for Fulton, Shelby, Dutton-Lainson, Atwood, and similar couplers. I've attached some…

view full answer...

Answer 4

You won't want to remove the break away pin from the switch, as this would activate the trailer brakes and run down the break away system's battery. You'll want to remove the cable from the safety chain loop on the vehicle.…

view full answer...

Answer 5

Because the trailer was stationary when this occurred, there's an excellent chance that nothing was damaged, but you can try some low-speed runs in a nearby empty parking lot. While coasting along at low speed (10-15mph) without using the…

view full answer...

Answer 6

Yes, all you'll need to do is disconnect the three wires running from the converter section in your Progressive Dynamics 4100 #PD4135K from the AC distribution panel (circuit breaker, ground bus bar, neutral bus bar). This will cut the power…

view full answer...

Answer 7

Yes, the Redarc Tow Pro Liberty part #RED52VR can install in your 2023 Ford Ranger that has the factory 7-way. It would wire directly to the brake controller install wiring that is present under the dash.

view full answer...

Answer 8

For the 205R16 tire on your Land Rover you can use the Rightline Gear Spare Tire Cover - 27" to 35" Diameter #RG87VR.

view full answer...

Answer 9

We can definitely set you up with a Redarc Tow-Pro Elite Brake Controller for your 2024 Ford Ranger with the factory 7-way. For that you can use part number #RED44FR, which will come with everything you need, controller included. This comes with the…

view full answer...

Answer 10

For the yoke style couplers my favorite coupler lock is the Fastway part #FA86-0015-312. We have found that this is the most universal of the locks we carry and also works the best. It will work great on your yoke coupler part #AT80072. I attached a…

view full answer...

Answer 11

The 'sleeve' or shank portion of the Fulton #F500266 caster assembly is meant to be compatible with Fulton F2 trailer jacks, which is why it's kind of oddly shaped. At the widest point, that sleeve is 2-1/2 inches in diameter, as shown in…

view full answer...

What Type of Coupler Does BlayLock Coupler BLTL-20 Fit

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching