Dimensions of the Cutout Needed for Valterra Universal Inlet and Lockable Hatch # A01-2002VP

Question

Question:

Is the cutout on the back of the lockable hatch round?

asked by: Ray

0

Expert Reply:

The Valterra Universal Inlet and Lockable Hatch for RVs - White - Gravity Fill # A01-2002VP has a completely round fill and round vent but the cutout is rectangular measuring 3 by 4-5/16 inch. It has 1-1/4 inch barbed connection and 1/2 inch vent. It fits both 4-1/4" wide x 4-3/4" high and 4" wide x 3" high cutouts and the locking cover will cover all the mounting hardware to give you a clean and secured connection.

expert reply by: Jason S

0

Answer 1

Hey Wyatt, so we have a hose that was designed to be used with the #T01-0091VP with the part #W01-4180 which does have a different thread size. This is intentional so that someone doesn't use a standard garden hose that someone might attempt…

view full answer...

Answer 2

Yes, the MORryde Suspension Upgrade Kit #MR46ZR can certainly be used with the Lippert Road Armor Equalizers. You will just want to be sure that the stock shackle links on your 2021 Cougar 29RKS are 2-1/4" long when measured center hole to…

view full answer...

Answer 3

There unfortunately isn't a guide to tell us the equalizer, shackle straps, and leaf spring sizing for your 2016 Grand Design Reflection 313RLTS so you'll need to a bit a of measuring to determine the best replacements. Before measuring…

view full answer...

Answer 4

According to the manufacturer, the Mighty Cord Replacement RV Power Inlet - 30 Amp Twist Lock - White #A10-30INVP is cETL listed, which means it has been certified and tested for use in Canada. The UL, CSA, and ETL marks all mean they have met and…

view full answer...

Answer 5

For your 2005 Fleetwood Tioga 22B you're going to want to use the RV City Water Inlet with Brass Check Valve #37262145. This is going to be the screw on style that will fit a 1-1/2" diameter cutout, has a removable screen filter to help keep…

view full answer...

Answer 6

Typically a suspension bolt will be measured by the shaft of the bolt not including the head, since the head of the bolt isn't used in mounting the springs. The shackles are 3-3/4" long x 1-1/2" tall overall and the bolt holes are…

view full answer...

Answer 7

While I can't for sure promise that the Suspension Shackle Kit part #MR46ZR fits your Arctic Fox I would be willing to bet a large amount of money that it would since you have the standard 1-3/4 inch wide springs which are basically always 9/16…

view full answer...

Answer 8

The Camco RV Drain Hose w/ Drain Trap and Evacuation Flange - 3/4" Diameter - 25" Long #CAM37420 is not designed to be shortened. The tube is flexible and will allow for the extra length which will also help with the sink not backing up. If…

view full answer...

Dimensions of the Cutout Needed for Valterra Universal Inlet and Lockable Hatch # A01-2002VP

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching