Are Additional Parts Needed for Installation of a Westin Diamond Step Bumper on a 1996 Dodge Dakota

Question

Question:

Are there any bolts at frame that need to be bought separately or is every item included? Thanks

asked by: Kim F

0

Expert Reply:

All of the mounting hardware is included with the Westin Diamondstep Replacement Bumper with Custom Install Kit, item # 63000-97800. You will not need to purchase any parts separately for attachment at the rear of your 1996 Dodge Dakota pickup.

expert reply by: Robert G

0

Answer 1

I spoke with my contact at Westin about your 1991 Ford Pickup. The Westin Bumper, part #21007-92230 is designed to work well for your truck, and matches the factory specifications for your vehicle. The bumper attaches to the frame rail on your truck…

view full answer...

Answer 2

The XLT refers to the style of the Westin bumper. I have included a diagram that shows the different bumpers to better illustrate how they are different. Bumper #21007-92230 will fit your 1971 Ford F-100 though you may find that the styling of bumper…

view full answer...

Answer 3

The Westin Fey SureStep Bumper #21002-92230 is a fit for your 1992 F-150 with standard bed and the same is true for the Surestep Deluxe XLT Rear Bumper #21007-92230. The only difference between these two bumpers is that the step-pad surface on…

view full answer...

Answer 4

To get the Bumper and mounting kit for your Dakota you will need to select between the Westin Diamondstep Replacement Bumper with Custom Install Kit, item #63000-97800, for 1987-1996 Dodge Dakota and the Westin Diamondstep Replacement Bumper with…

view full answer...

Answer 5

We don't sell OEM replacement bumper trim panels for vehicles like your Tacoma but we do offer replacement parts for the aftermarket bumpers we offer. One of the following Westin replacement step pad items may work for you. #00000923 #00000966…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Are Additional Parts Needed for Installation of a Westin Diamond Step Bumper on a 1996 Dodge Dakota

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching