Will Quick Fist part # QF10010 Fit over Yakima Round Crossbar

Question

Question:

can they be attached to Yakima bars?

asked by: Ben

0

Expert Reply:

Yes, since the Yakima crossbars are 1-1/8 inch in diameter and the bar width range of the Quick Fist part # QF10010 is 1 inch to 2-1/4 inch this will fit on a Yakima crossbar.

expert reply by: Jameson C

0

Answer 1

I checked with Yakima and to mount the Mako saddles and HullyRollers on the factory crossbars of your 2017 Toyota Highlander two sets of the universal MightyMounts #Y03590 are required. The picture I attached shows your setup of Mako saddles and…

view full answer...

Answer 2

The Yakima TopGrip Paddle, Shovel, or Axe Holder Brackets for Roof Rack Crossbars #Y04086 is only compatible with crossbars that have a T-slot channel on top, so if your crossbars have a T-slot channel then it will work. That said, this is not made…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 5

For your 2023 Subaru Outback, I recommend the Curt Trailer Hitch item #C69VV. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver. I really like this hitch because it is an…

view full answer...

Answer 6

We have 2 inch hitches that fit your 2023 Subaru Outback Wilderness like with the etrailer part #e25TR but we do not have a Wilderness specific fascia panel at this time. This hitch is mostly hidden since only the hitch hangs below the rear bumper…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

The Replacement Clamp #RRSP112 is a single clamp for the Rhino-Rack Roof Mounted Steel Cargo Basket #RMCB. Included is the clamp, screws, and all parts to secure the basket at one point to your crossbar.

view full answer...

Answer 9

There is indeed one option for a flush-design roof rack that fits your 2022 Subaru Outback Wilderness, which is from Rhino-Rack, and I went ahead and verified this fit for you with the manufacturer. The correct part number is the following: -…

view full answer...

Answer 10

The Coil SumoSprings Custom Helper Springs part #CSS-1125R are a fit for a 2022 Subaru Outback Wagon Wilderness. They are a great option to help stiffen the rear suspension while towing or hauling heavy loads. They are also the confirmed option we…

view full answer...

Answer 11

The installation for the EcoHitch Hidden Trailer Hitch Receiver #EH34FR on your 2023 Subaru Outback Wilderness will be the same as on the 2022 you saw in the video I linked below. While your rear fascia does have a different appearance they both use…

view full answer...

Answer 12

The rubber pads for the Rhino-Rack XTray Clamp Set unfortunately are not sold separately so you would either need to reach out to Rhino-Rack to see if they could ship you them or purchase a replacement clamp set #RRSP112.

view full answer...