Replacing 10x1-1/2 Inch Brake Assemblies with 10x2-1/4 Inch Brake Assemblies
Question:
hey i was wondering if it is possible to change the brake assemblies on my 2010 springdale travel trailer from 10 x 1 1/2 to 10 x 2 1/4 assemblies. The outer bearing from the original drum and hub is a L44649 and the inner bearing is a LM67048. I need to know is there is a drum hub assembly that will fit.
asked by: Kolton
Expert Reply:
As long as your spindles are 4.75 inches from seal to threading like # TRU24FR or # TRU57FR they are compatible. I've attached a photo to assist. You will be able to use the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA. We do not carry a hub that will fit the bearings you referenced.
My recommendation is to change your axle or at least your spindle to allow you to use standard hubs like # AKHD-545-35-K. This will require taking your axle to a professional welder who has a jig.
Products Referenced in This Question
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
#84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Trailer Spindles
- Standard Spindle
- 2 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
#42 Spindle for 5,200-lb to 7,000-lb Trailer Axles - 2-1/4" Diameter
- Trailer Spindles
- Standard Spindle
- 2-1/4 Inch Diameter
- Round
- For 5000 lb Axle
- For 6000 lb Axle
- For 7000 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Video: Solera Replacement Awning Fabric Review
- Video: Solera Replacement Awning Fabric Measurement and Installation
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: RV Roof Membrane
- Shop: Replacement 11'1" Fabric for 12' RV Awning - Universal - White Fade
- Shop: Replacement 11'1" Fabric for 12' RV Awning - Universal - Sand Fade w/White Weatherstrip
- Q&A: Will the Installation Set for Bearing, Races, and Seals Work With Timken Bearings, Races, and Seals?
- Shop: Replacement 11'1" Fabric for 12' RV Awning - Universal - Solid Black
- Shop: Timken Grease and Oil Seal - Double Lip - I.D. 1.719" / O.D. 2.565" - 473336
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Video: ProGrip Cam Buckle Lashing Straps Review
- Q&A: Recommended Tool To Use When installing Bearings In Hub
- Video: etrailer Trailer Bearings Races Seals Caps - Bearings - LM67048 Review
- Shop: Replacement 11'1" Fabric for 12' RV Awning - Universal - Sand Fade w/Black Weatherstrip
- Q&A: Can the Armature Surface of an Electric Drum Brake Hub Be Turned Like the Brake Surface
- Q&A: Correct Replacement for Dexter Electric Trailer Brake Assemblies 023-476-00
- Video: Ultra-Fab Products Camper Jack - Leveling Jack - UF48-979002 Review
- Video: Ultra-Fab Products Camper Jack - Leveling Jack - UF48-979006 Review
- Q&A: Troubleshooting Grease Seal that Keeps Blowing Out on Trailer Axle
- Q&A: Recommended Upgrade Replacement for BAL Stabilizer Jacks
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Video: Review of Dexter Axle Trailer Brakes - Brake Assembly - K23-472-00
- Search Results: 84546uc3
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Search Results: break away kit
- Search Results: junction box
- Q&A: Clips and Clamps to Attach Wires and Wiring Harnesses to the Bottom of a Trailer Frame
- Shop: RV Interior Lighting
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Search Results: electric brake magnet