Replacement Vent Cover for Fan-Tastic Roof Vent

Question

Question:

I have a 2003 Tiffin Allegro Bus and the roof vent on the Fan Tastic broke off. Looks like it was riveted to the hinge? Is this the correct replacement? It looks like it is. Thanks!

asked by: Peter W

0

Expert Reply:

The Replacement Dome for Fan-Tastic Vent RV Roof Vents # FVK1020-19 has a metal hinge that is installed with hardware. Should your Fan-Tastic roof vent have the same type of hinge then this would work for you. There are other hinges as well which you can see in the attached photo. If you match up the type you had or give me the model number of your vent I may be able to verify the correct replacement for you.

expert reply by: Kyle S

0

click to enlarge

Answer 1

Looks like the correct replacement vent lid you would need is the part #FVK1020-19. This is the correct replacement vent lid for Fantastic roof vents like yours.

view full answer...

Answer 2

The Replacement Dome for Fan-Tastic Vent RV Roof Vents #FVK1020-19 that you referenced measures 14-13/16 inches from the hinged side to the opposite side (tall) and then 14-13/16 inches from side to side (wide). I have attached a picture for…

view full answer...

Answer 3

I am not able to find any reference to the Fan-Tastic part number you mentioned but if the #FVK1020-19 looks like what you have and the hinge design is the same it would be the correct fit.

view full answer...

Answer 4

By "slider track" I believe you are referencing the hinge; if you take a look at the accompanying photo you should be able to see what I am talking about. That should be what your Fan-Tastic vent has and since your model 6000A/6000BTA will…

view full answer...

Answer 5

The replacement lids for propane tank covers aren't universal so since you aren't sure that your cover is a Camco (sounds like it's not) I can't guarantee this would work. Instead your best solution that we can provide would be an all…

view full answer...

Answer 6

From what I've read, the 20 and 30 lb tanks are the same diameter, around 12 inches, but different heights. According to Camco, the #CAM40549 replacement propane tank cover lid will work on either the #CAM40539 or the #CAM40523 covers, which will…

view full answer...

Answer 7

The Replacement Dome for Fan-Tastic Vent RV Roof Vents part #FVK1020-19 is a direct replacement option for your vent. The cover is actually made by the vent manufacturer so there won't be any issues.

view full answer...

Answer 8

The Hook and Keeper Latch #BP64FR only comes in 4". We do carry 6" hooks but they have a slightly different design: T-Style Hook and Keeper Door Holder for RV or Enclosed Trailer - 6" Hook - Plastic - Black #37210434 Hook and Keeper…

view full answer...

Answer 9

Yes, I contacted Fan-Tastic Vent and the replacement lift arm part #FVK8011-05 fits vents with domed lids. If your vent has a flat lid then you need the lift arm for flat lids part #FVK8014-05. I have attached two photos that show the difference.

view full answer...

Answer 10

Take a look at the hinge in the picture of the vent lid part #FVK1020-19 that you referenced. If yours matches that design this would be the correct hinge for your trailer. This does have an overall length and width of 15 inch by 15 inch.

view full answer...

Answer 11

We do have trailer levels that do not require drilling into your camper, but the Camco AccuLevel Trailer Bubble Level #CAM25563 does require drilling to mount it. Since you (understandably) do not want to drill a hole in your camper I recommend the…

view full answer...

Answer 12

We do carry the replacement louvered front cover for the Camco RV and Enclosed Trailer Roof Vent Cover, #CAm40431. The Replacement Screen for the Camco RV Roof Vent Cover, #CAM40439, is the white replacement cover you will need for your vent cover.

view full answer...

Replacement Vent Cover for Fan-Tastic Roof Vent

Product Page this Question was Asked From

Continue Researching