1-1/4" Ball Mount Needed with a 4" Rise
Question:
Am looking for a 1 inch to 1/14 inches adapter/converter or a 1 inch ball mount with a 4 inch rise 4/5 inches shaft, do you have any or can you make one? Thanks
asked by: Melvin A
Expert Reply:
Although we do not have any adapters that change a 1-1/4" ball mount to a 1" ball mount, we do have a wide selection of ball mounts that you can choose from.
Among the linked selection we have the Curt Class I Drawbar # C45021 which has a 4" Rise, is 9" Long, and is rated for 200 lbs Tongue Weight (TW).
This is compatible with any hitch ball that has a 3/4" shank like the 1-7/8" Hitch Ball # A-80 or the 2" Hitch Ball # A-82.
I have also attached a link to our helpful article on choosing the correct ball mount.
Products Referenced in This Question
1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Product Page this Question was Asked From
Curt Class I Drawbar - 4" Rise - 9" Long - 2,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 3/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Rise - 4 Inch
- Fits 1-1/4 Inch Hitch
- 2000 lbs GTW
- Class I
- CURT
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Does Curt Trailer Wiring Harness part # C55567 Fit 2014 Mazda 3 Hatchback
- Q&A: Vehicle Squeaks After Trailer Hitch Install
- Q&A: Why Would Exhaust Rattle On Hitch Installed on a 2015 GMC Terrain
- Q&A: Hitch Rattles Against Exhaust of 2019 GMC Terrain
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Q&A: Are Additional Lights Required on Towed Vehicle When Using a Tow Dolly
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Measure for Trailer Hitch Drop
- Q&A: How to Determine the Right Air Pressure to Fill a Trailer Tire
- Article: Trailer Hitch Receiver Sizes
- Article: Hitch Adapters and Extenders
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: My Trailer Hitch Doesn't Fit