Recommended LED Tail Light to Use with Trailer Light Mounting Bracket # BK70BB
Question:
Im looking at Item # BK70BB to go with lights Item # STL78RB. Im curious if these lights will fit the bolt holes in the bracket.
asked by: Jim
Helpful Expert Reply:
The Optronics Sealed 6-1/2 Inch Oval LED Tail Light # STL78RB referenced in your question is a flange mount light that includes 4 mounting holes. The mounting holes are spaced 7 inches apart lengthwise and 2-3/4 inches apart widthwise. The Optronics Trailer Light Mounting Bracket # BK70BB that you also mentioned will not be the best fit for this particular style of light. The bolt holes on the bracket are spaced apart on center by a length of 6-11/16 inches, so they will not line up with the mounting holes on this tail light.
If you are wanting to use this mounting bracket, a better option will be the Optronics Trailer Tail Light # STL72RB and 6-1/2 Inch Grommet # A70GB, which are confirmed work together to fit this bracket and will work well.
Products Referenced in This Question
PVC Grommet for 6-1/2" Oval Trailer Tail Lights
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- Grommet
- 6-1/2 Inch Long
- Oval
- Optronics
more information >
Trailer Light Mounting Bracket for 6-1/2" Oval Trailer Lights, Steel - Black Powder Coat
- Accessories and Parts
- Trailer Lights
- Mounting Hardware
- 6-1/2 Inch Diameter
- Brackets
- Black
- Optronics
more information >
Optronics LED Trailer Tail Light - Stop, Tail, Turn - Submersible - 10 Diodes - Red Lens
- Trailer Lights
- Tail Lights
- Stop/Turn/Tail
- Oval
- Recessed Mount
- Submersible Lights
- LED Light
- 6-1/2L x 2W Inch
- Red
- Optronics
more information >
Product Page this Question was Asked From
Optronics LED Trailer Tail Light - Stop, Turn, Tail - Submersible - 10 Diode - Oval - Red Lens
- Trailer Lights
- Tail Lights
- Stop/Turn/Tail
- Oval
- Surface Mount
- Submersible Lights
- LED Light
- 6-1/2L x 2W Inch
- Red
- Optronics
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Article: Trailer Lighting Requirements
- Q&A: Angle of Different Stabilizer Positions for Ark Drop Down Corner RV Stabilizer Jacks
- Q&A: Replacement Hub/Drum for Lippert 8k Hub 2420801
- Q&A: Dimensions for the 10K Demco eZ-Latch A-Frame Trailer Coupler
- Q&A: Replacement for Atwood Yoke Style A-Frame Coupler For 2 Inch Hitch Ball
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tire Sizing
- Q&A: Can ARK Stabilizer Jacks Rotate 180 Degrees
- Q&A: Will Stromberg Carlson Base Pad Extreme Qty 6 Be Able to Handle 20K 2019 Grand Design Momentum 397TH
- Article: Stability Control for Heavy Duty Vehicles
- Article: Most Popular Wheel Bearings
- Q&A: Troubleshooting Dexter Electric Over Hydraulic Trailer Brake Actuator Cycles On and Off
- Article: How to Measure for Trailer Hitch Drop