Options for Allow Tailgate To Open on 2011 Toyota Tundra with Electric A-Frame Jack
Question:
I have a 6894 lb dry weight with a 750 lb TW. The trailer is a 2016 mallard M292. I would like to open my tailgate while hooked up. Is there an electric jack that will allow this?
asked by: Kevin A
Helpful Expert Reply:
There's a few variables that prevent me from knowing exactly what it would take to allow an electric jack to fit with your tailgate open but there are ways to help get more clearance. One way is to go with a longer ball mount that moves the trailer further away from the tailgate when folded down. More on that down below... The other option is a fifth wheel tailgate like part # VGT-70-4000, which is a confirmed fit for your 2011 Toyota Tundra, that has a cut out section to allow clearance for a jack.
For a longer ball mount we have the part # C45270 which is 13 inches long and has a 4 inch drop, for more drop we have the part # D-28 which is 14-1/4 inches long and has a 6 inch drop.
It has a lifting capacity of 4,500 lbs which would be more than you'd need but will ensure that the jack will operate quickly and last a long time.
Products Referenced in This Question
Curt Ball Mount for 2" Hitches - 4" Rise, 6" Drop - 14-1/4" Long - 6,000 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 4 Inch
- Fits 2 Inch Hitch
- 6000 lbs GTW
- Class III
- Long Shank
- CURT
more information >
Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate with Lock for Toyota Trucks
- Tailgate
- Truck Tailgate
- Fifth Wheel Tailgate
- With Lock
- Louvered Tailgate
- Composite Plastic
- Stromberg Carlson
more information >
Product Page this Question was Asked From
Curt Class III Drawbar - 2" Rise - 4" Drop - 13" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 2 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Long Shank
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Availability of 7-1/2-inch-long V-Shaped Replacement Keel Roller for Boat Trailer
- Q&A: LED Trailer Taillight Recommendation for a 3110 Feather Lite Car Trailer
- Q&A: What Are the Thread Sizes of the Orifice Connector for Trailer Brake Actuators
- Q&A: Troubleshooting No Power at the Tail Light Pin on a 2007 Toyota FJ Cruiser
- Q&A: Wiring Diagram for 7-Way Round Pin Trailer and Vehicle Side Connectors
- Q&A: Replacement Kwikee Step Controller for Part 1800709 on 2017 Thor Windsport
- Q&A: Which Brakes to Fit in Dexter 8-247 Hub and Drums
- Article: Will Flat Towing Blow Up Your Transmission?
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Wiring Diagrams
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Article: 2023 Holiday Must Haves