Where is 135-Degree Hose Bend on Wheel Masters 4-Hose Inflation Kit

Question

Question:

The photo appears to show an inside bend angle less than 90 degrees yet the written description says 135 degrees. Can you show where the 135 degree bend is please?

asked by: Wayne F

0

Expert Reply:

The Wheel Masters 4-Hose Inflation Kit # WM8001-135 referenced in your question does include two stainless-steel-wrapped hoses with a 135-degree bend. These will allow for easier access to the valve stems of the outer tires on your vehicle. I have attached an image with this feature highlighted that you can take a look at.

This inflation kit will relocate the inner tire's valve stem to the outer wheel and extend the valve stem on the outer tire. A total of 4 hoses are included.

expert reply by: Chris R

0

click to enlarge

Answer 1

For your 2014 Ford F-250/350 Super Duty you will want to use Wheel Masters 4-Hose Inflation Kit part #WM8001. The bend on the Wheel Masters 4-Hose Inflation Kit part #WM8001-135 causes the hoses to be in contact with your rim as soon as it comes…

view full answer...

Answer 2

Yes, the Wheel Masters 4-Hose Inflation Kit #WM8001-135 that you referenced does fit your 2018 Ford F-450 dually. I checked the wheel size of your vehicle (19-1/2 inch diameter) and found that it uses the correct size to use this kit.

view full answer...

Answer 3

The etrailer Electric Trailer Brakes #AKEBRK-6 will likely fit your 5,200 lb AL-KO axle. These are 12" x 2" with a 5 bolt brake flange mounting pattern. I recommend checking your brake flange just to be sure. If you have the older 4 bolt…

view full answer...

Answer 4

The SuperSprings Custom Suspension Stabilizer and Sway Control Kit #SSA22 is listed to fit and install above the leaf springs on your 2019 Coachmen Leprechaun 319MB. I tried looking up a photo of the suspension on your motorhome but I could find…

view full answer...

Answer 5

You were on the right track- the Wheel Masters 2 Hose Inflation Kit #WM8009 are designed for 16" to 19-1/2" wheels like the ones on your Winnebago Access and will work with TPMS systems. The 7-1/2" hose length is going to supply you…

view full answer...

Answer 6

We have some kits like the Wheel Masters 4-Hose Inflation Kit #WM8001-135 that essentially extend the valve stems out so they're easier to access, but we don't do any kind of work on valve stems. These are compatible with a TPMS kit as well…

view full answer...

Answer 7

For a 2023 Forest River FR3 30DS you could use either the Roadmaster Exact Center Steering Stabilizer w/ Custom Brackets for Class A Motorhomes #RM63RR or Roadmaster Reflex Steering Stabilizer with Mounting Brackets #RM62VR. Both stabilizers will…

view full answer...

Answer 8

Yes, the Timken Bearing Kit #TMK52VR will fit your 3,500 lb axle as it fits an standard #84 spindle. The only time this kit won't fit with a 3,500 lb axle is if the trailer/axle is made before the 2000's since that's about the time that…

view full answer...

Where is 135-Degree Hose Bend on Wheel Masters 4-Hose Inflation Kit

Product Page this Question was Asked From

Continue Researching