Will the BAKFlip G2 Hard Tonneau Cover # BAK26331 Fit a 2017 Ford F-350 with an 8 foot Bed

Question

Question:

Is the G2 you have the same as MFR# 1126331?

asked by: Ken

1

Helpful Expert Reply:

The BAKFlip G2 Hard Tonneau Cover # BAK26331 that you referenced is confirmed to fit your 2017 Ford F-350 with an 8 foot bed and is the same as the BAK Industries part number 26331.

I have attached a review video for you to check out.

expert reply by: Jon G

1

Answer 1

The BAKBox 2 Collapsible Truck Bed Toolbox #BAKBX92333 is designed to work with rails on the BAK Revolver X2/X4s, Roll-X (discontinued), and BAKFlip tonneau covers. Although the BAKBox 2 has not been tested for compatibility with the RetraxPRO MX…

view full answer...

Answer 2

The Extang Solid Fold 2.0 Hard Tonneau Cover - Toolbox Edition #EX84488 sits on top of the bed rails of your 2022 Ford F-350 Super Duty 8' bed so if your 5th wheel hitch sits below the top of your bed rails this will physically fit in that…

view full answer...

Answer 3

The front header panel of the Bak tonneau cover part #BAK48331 that fits your 2022 Ford F-250 long bed is about 6 inches long and each of the folding sections is about 22-1/2 inches long.

view full answer...

Answer 4

Per TruXedo, the rails of the TruXedo Sentry CT Hard Tonneau Cover #TX1579616 are going to protrude 3" into the bed from the edge of the bedrails on both sides.

view full answer...

Answer 5

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 6

I actually have a great option to keep your B&W Companion #BWRVK3305 protected when you aren't towing. You will need to make sure the head of your B&W will sit just below the bed rails though, so depending on how you have the height set,…

view full answer...

Answer 7

The correct Timbren Suspension Enhancement System for a 2020 Ford F-350 is part #TFR350SDJ. The part #TFRTT350J is designed for service body applications. The difference between them is height. The service body version is single convoluted and…

view full answer...

Answer 8

I do have a great suspension enhancement kit I can recommend for your 2019 Ford F-350 diesel, DRW, with the factory fifth wheel rail kit, but your vehicle does not have any air bag style kits available. The best option is the Timbren kit part…

view full answer...

Answer 9

Good news! I can help you wire your 12 volt fuel pump to work with your 7 way vehicle plug. To accomplish this task you will need a few things: 7-way plug #A7WCB 10 gauge wire #10-2-1 2 pole flat wiring #HM47965 butt connectors #DW05745-5 First thing…

view full answer...

Will the BAKFlip G2 Hard Tonneau Cover # BAK26331 Fit a 2017 Ford F-350 with an 8 foot Bed

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching