Should 12 Volt Power Circuit of 7-Way Charge Trailer Battery
Question:
Hello, I put a volt meter on my travel trailer that has 2 - 12v marine batteries and got a voltage of 11.58v I then towed it about 10 miles home and when I got home, there was voltage reading of 11.56v. Shouldnt the truck charge the batteries? I know my 2001 silverado 1500 did.
asked by: Derek
0
Expert Reply:
The difference between 11.56 and 11.58 volts is pretty small relatively speaking. The truck SHOULD be putting a maintenance charge on the battery as you are towing, but the amount of voltage that circuit puts out isn't so large that it will make a huge difference.
Test the 1:00 pin of your 7-way for voltage with a circuit tester like part # PTW2993 to see if its active.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: All Parts Needed to Flat Tow 2014 Chevy Silverado 1500 Behind Motorhome
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Troubleshooting Brake Controller Installations
- Q&A: How to Test Brake Controller without Trailer Connected
- Q&A: Trailer Lights Left Side Turn Signal and Brake Lights Not Working
- Q&A: Recommended Flat Towing Parts for a 2024 GMC Canyon Denali
- Q&A: Troubleshooting No Running Lights on Trailer but Turn Signals and Brake Lights Work
- Q&A: Troubleshooting Lack of 12V Power at 7-Way Trailer Connector on 2019 Ford F-150