Trailer Hitch Available for a 2012 Mazda 5 Hatchback
Question:
I cant find the trailer hitch for my new 2012 mazda5. The only one I found is the part3 11338 which is for 2010 mazda5. Will 11338 work for 2012 model or there will be a new one coming out soon for 2012 model? Thanks.
asked by: Sai T
Expert Reply:
I spoke with my contact at Curt and he said they have just released the Curt Class I 1-1/4 Inch Hitch, part # C11127 for the 2012 Mazda 5 Hatchback. It is a Class I hitch with a 2,000 lbs towing weight capacity and a 200 lb tongue weight capacity. The ball mount and pin and clip are included.
The instructions say you will have to lower the exhaust, enlarge access holes on the frame, and trim the heat shield. I am including a link to the installation instructions on the Curt hitch.
If you will be towing with this hitch you will want to check your owners manual or the Mazda dealer for the towing capacity of your 2012 Mazda 5 Hatchback.
To complete your towing setup, you will need the following items:
Curt 2 Inch Hitch Ball, part # A-82, or Curt 1-7/8 Inch Hitch Ball, part # A-80
Curt T-Connector Wiring Harness, part # 56016
I am including a link to the installation instructions on the Curt wiring harness.
Products Referenced in This Question
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
1-7/8" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 2000 lbs GTW
- Class I
- Class II
- CURT
more information >
2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Stainless Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 3/4 Inch Diameter Shank
- 3500 lbs GTW
- Class I
- Class II
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Choose a Hitch-Mounted Bike Rack
- Q&A: Replacement AC Unit For The Carrier 68RV15102A
- Article: How Much Solar Power Do I Need For My RV?
- Article: My Trailer Hitch Doesn't Fit
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Trailer Hitch Receiver and Wiring That Fits 20203 Mercedes-Benz GLE 53 AMG
- Article: What Do I Need To Tow A Trailer?
- Article: Trailer Hitch Receiver Sizes
- Article: Rooftop Cargo Carriers