Ladder Rack Recommendation for a 2012 Toyota Tacoma with the Deck Rail System

Question

Question:

just read your recommendation saying the erickson model wont work, but recommenda Rola product for the tacoma 2015...is this your recommedation for the 2012 tacoma as well?

asked by: Tony M

0

Expert Reply:

Yes, for your 2012 Toyota Tacoma with the deck rail system I recommend using the Rola Haul-Your-Might T3 Truck Bed Ladder Rack part # 59799. This ladder rack is one of our most cost effective options we have for your vehicle.

The rack is constructed of aluminum and can support weight capacities up to 800 lbs. The aerodynamic elliptical shape of load bars reduces drag and wind noise. The load bars are 65-1/16" long x 3-1/16" wide which allows for the use of most crossbar mounted accessories.

I have attached a photo of this ladder rack installed on a similar Toyota Tacoma for you as well.

expert reply by: Conner L

0

click to enlarge

Answer 1

Yes, since your 2016 Nissan Titan XD Platinum Reserve has the utili tracks the Rola Haul Your Might part #59799 that you referenced will fit and work well. The tool boxes you have would not interfere with the ladder rack from attaching. If you…

view full answer...

Answer 2

For your 2018 Toyota Tacoma with the Deck Rail System, the best ladder rack - because of its easy installation, strength, durability, and economical price compared to similar racks, is from Rola: - Rola Haul-Your-Might T3 Truck Bed Ladder Rack #59799…

view full answer...

Answer 3

The Rola Haul-Your-Might T3 #59799 does fit your 2016 Toyota Tacoma with the deck rail system. Like you said it will not work with the tonneau cover. Whether it will fit with the pins still installed depends on their location on your specific cover.…

view full answer...

Answer 4

I attached a diagram of how the feet and mounting brackets of the Rola Ladder Rack part #59799 assemble. The base of the rack could be left on if you wanted to unbolt them from the feet but realistically it would be easier to just remove the feet all…

view full answer...

Answer 5

I have a solution for you. Unfortunately, since the Rola Haul-Your-Might T3 #59799 clamps onto the bed rails of your 2018 Nissan Titan's 5-1/2 foot bed with the utili-tracks system, you will not be able to use it with a tonneau cover. However,…

view full answer...

Answer 6

We have ladder racks that do fit your 2019 Toyota Tacoma with the deck rail system but the MaxxTow MT70233 that you referenced does not fit models of the truck that have the deck rail. You'd need to go with a rack like the Rola Haul Your Might…

view full answer...

Answer 7

It sounds like you like to use your 2018 Nissan Titan for recreational use and because of that the Yakima OverHaul HD is the perfect ladder rack for you. For this ladder rack you can either get it with the 68" Bars as part #Y01151-5868 or you…

view full answer...

Answer 8

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 9

I checked with Rola and ladder rack #59799 does work on the 2016 Nissan Titan XD with the Utili-Track system in the bed. There is hardware included that uses the channels in the track system to mount the ladder rack.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Ladder Rack Recommendation for a 2012 Toyota Tacoma with the Deck Rail System

Continue Researching