Recommended Wiring to Install Trailer Brake Controller on 2012 Ford E350 Van
Question:
2012 ford E350 the van did not come with factory towing brakes. I want to add them, does the harness on mine have that option ie: blue line and brake line. I dont see the blue wire under the van going to the back.
asked by: Thomas S
Helpful Expert Reply:
The items that you need in order to install a trailer brake controller on your 2012 Ford E350 will depend on what the vehicle is already equipped with.
If the van has a factory 7-Way at the rear of the vehicle, then all the necessary wiring is already ran and there will be a port located behind the vehicle's dash. To install a brake controller like the excellent Tekonsha Prodigy P2 # 90885, you will just need the Plug-In Adapter # 3034-P. One end of the adapter will connect to the brake controller itself and the other end will plug into the mentioned port in your E350.
If your Ford E350 instead has a factory 4-Way connector, you will just need item # 37185 to complete the wiring. The brake (blue) wire will need to be manually run from the brake controller back to the plug at the rear of the vehicle. You can still use the Plug-In Adapter mentioned above to install the brake controller unit.
If your 2012 Ford E350 Van did not come with a factory connector at the rear of the vehicle, you will just need to add a couple parts to install a trailer brake controller.
You will first need to install a 4-Way connector. For this, I recommend the Tekonsha T-One Vehicle Wiring Harness # 118551. This is custom-fit for your vehicle and will install by connecting directly existing ports located behind the driver and passenger side tail lights. I have attached an installation video that you can use for reference.
Once the 4-Way is installed, you will need to use the Universal Wiring Kit # ETBC7 to install a fully functional 7-Way from the existing 4-Way connector. This kit will include everything needed to install this and the brake controller. I have attached an article that details the installation steps that you might find helpful. I have also attached a complete installation video of the Prodigy P2 # 90885 on your vehicle that you can check out.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Ford
- Accessories and Parts
- Trailer Brake Controller
- Wiring Adapter
- Plugs into Brake Controller
- Vehicle Specific
- Tekonsha
more information >
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Automatic Leveling
- Under-Dash Box
- Dash Mount
- Up to 4 Axles
- LED Display
- Up to 360 Degrees
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Article: 5 Things to Know About Weight Distribution Hitches
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: Parts Needed To Install A Brake Controller On A 2023 Freightliner Cascadia
- Q&A: Brake Controller Recommendation for a Truck with Air Brakes and a Trailer with Electric Brakes
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Parts Needed to Install 7-Way/4-Way on 2024 Kia Telluride with LED Taillights
- Q&A: How do I Tell if the Brake Controller is Bad
- Q&A: How Is Spring Bar Tension Set Up with Trailer Weight Distribution System