What is the Elevation Limit for Camco Olympian Wave 6 Catalytic Safety Heater CAM57341

Question

Question:

What elevation will the heater work at

asked by: Jeff B

0

Expert Reply:

I checked with Camco and Olympian Wave 6 Catalytic Safety Heater for Mid-Sized RVs Item # CAM57341 is safe for use at elevations up to 12,000 feet.

expert reply by: Michael H

0

Answer 1

I spoke with my contact at Camco regarding the Olympian Wave 6 Catalytic Safety Heater #CAM57341 referenced in your question. He stated that the heater can indeed be mounted inside a wall, in a recessed position with the grate/front flush with the…

view full answer...

Answer 2

The distance between the left and right mounting holes on the back of the Camco Wave 6 heater, part #CAM673541 is 9.65 inches.

view full answer...

Answer 3

The Camco Olympian Wave 6 Catalytic Safety Heater #CAM57341 does have specific requirements for you to be able to keep it on, at night or otherwise. The following instructions come directly from the manual: "To assure complete combustion,…

view full answer...

Answer 4

The Camco Olympian Wave 3 Catalytic Safety Heater for Small RVs part #CAM57331 does not come with a thermostat. I am not really sure how that would work on a propane heater as such but we do have an electric heater with a built-in thermostat, the…

view full answer...

Answer 5

For the Camco Olympian Wave 6 Catalytic Safety Heater #CAM57341, a low-pressure regulator is designated as 11" w.c. (water column), as you can see in the accompanying cut outs I added. You can go from a hose to the furnace with the Camco…

view full answer...

Answer 6

The Camco Olympian Wave 6 Catalytic Safety Heater for Mid-Sized RVs #CAM57341 is not designed to run off of unregulated propane. It needs LP gas which is regulated to 11 inches of water column. So you would need a regulator like the part #CAM57703…

view full answer...

Answer 7

What you need is the Camco Propane Adapter #CAM59213. This allows you to adapter a hose like part #CAM57703 that you'd use for the Wave 6 #CAM57341 to connect to a 1-lb (throwaway) bottle of propane. Attached is a quick demonstration video…

view full answer...

Answer 8

To connect your Camco Olympian Wave 6 #CAM57341 to your propane tank you will want the Camco Low-Pressure LP Gas Regulator #CAM57703. This comes with a 6 foot hose and is rated for 75,000 BTUs per hour.

view full answer...

Answer 9

My contact a Camco conformed with me that the Camco Olympian Wave 3 Catalytic Safety Heater, #CAM57331 will efficiently operate up to 8,000 to 9,000 feet. After reaching this height you will you will see that this heater will begin to not operate…

view full answer...

Answer 10

The flame is supposed to go out when you switch the valve from "start" to "high". Check out the demonstration video I attached which goes through the whole process of starting and using the Camco Olympian Wave 3…

view full answer...

Answer 11

The Camco Olympian Wave 6 Catalytic Safety Heater #CAM57341 requires low pressure LP which is designated as 11" w.c. (water column). What you will need to use is the Camco Low-Pressure LP Gas Regulator #CAM57703, which will connect from…

view full answer...

Answer 12

I recommend using the Camco Low-Pressure LP Gas Regulator w/ 12' Long Hose #CAM57721 for your Camco Olympian Wave 6 #CAM57341. This comes with 12' of hose which is a bit shorter than what you're wanting, but the flip side of…

view full answer...

What is the Elevation Limit for Camco Olympian Wave 6 Catalytic Safety Heater CAM57341

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching