What is the Crossbar Spread Allowed on the Thule Motion XT Rooftop Cargo Box

Question

Question:

What is the minimum and maximum of the spread bars for this box, thanks

asked by: Alejandro

1

Helpful Expert Reply:

The Thule Motion XT Rooftop Cargo Box, # TH629706, had a minimum crossbar spread of 23-5/8 inches and a maximum of 36-7/8 inches.

To measure crossbar spread measures from the center of the front crossbar to the center of the rear crossbar.

expert reply by: Jared P

1

Answer 1

The Thule Motion XT XL part #TH629706 that you referenced can fit a crossbar spread range of 23-5/8 inches to 36-7/8 inches.

view full answer...

Answer 2

We have recommended in the past for people in similar situations as yours to modify their boxes and install the Hardware part #TH04997 which has much wider U-bolts compatible with factory and aftermarket aero style crossbars. You basically would have…

view full answer...

Answer 3

The Rhino Rack ROC25 part #RR46XR has a 165 lb dynamic weight capacity which means that's how much it can carry while travelling and incurring the standard bumps and movement that creates. While Rhino Rack doesn't give a static weight…

view full answer...

Answer 4

I contacted the manufacturer for you, and was told the Yakima SkinnyWarrior Roof Rack Cargo Basket #Y07014 measures 11" from outside to outside of the middle bars. Then from the outside of the basket itself to the inside of the closest bar is…

view full answer...

Answer 5

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 6

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 9

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 10

According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…

view full answer...

Answer 11

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Answer 12

The Large Yakima OffGrid #Y07139 Cargo Basket uses crossbar clamps that are designed to be universal. They will fit virtually any crossbar shape, including most aftermarket and OEM crossbars. I was not able to find any schematics online that would…

view full answer...

What is the Crossbar Spread Allowed on the Thule Motion XT Rooftop Cargo Box

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching