Are Crossover Tool Box Mounts Included with TracRac Pro2 Ladder Rack with Cab Extension TH37002XT-EX

Question

Question:

Hello, Im looking at Part # TH37002XT-EX I have a tool box in the truck, Does the rack come with the tool box mounting brackets? I also have the extra tie down brackets and the straps in my check out cart, I didnt want to purchase till I heard back about the tool box mounting brackets. Thank you,

asked by: Alan J

0

Expert Reply:

The TracRac Pro2 Ladder Rack with Cab Extension # TH37002XT-EX is a confirmed fit on your 6-1/2-foot-bed 2016 Chevy Silverado 2500. This ladder rack includes mounts for a crossover style tool box. The tool box mounts are integrated into the mounting clamps.

expert reply by: Adam R

0

Answer 1

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 2

GM only made a 5.5', 6.5', and 8' bed length for their 2018 Silverado 1500 models. If you're measuring the outside of the bed and not the inside from the bulkhead to the tailgate you'll get a longer length like the 84"…

view full answer...

Answer 3

The air bags that come in the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL88204 has a 5" - 7" standard operating distance and the difference is just dependent on how much room you have available. So…

view full answer...

Answer 4

The Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers #AL88204 will fit with your lifted 2018 GMC Sierra 1500 but you might need to add a spacer kit if you had to lift the back of your truck. Since you didn't have…

view full answer...

Answer 5

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 6

The Husky Center Line Weight Distribution with Sway Control 32217 is for 600 lb to 800 lb total tongue weight capacities (the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the rear axle of your tow…

view full answer...

Answer 7

You are exactly in the middle between the two sizes of the Yakima Sidebars for the Overhaul HD ladder racks. So what you'd need to do is decide if you'd rather spread the uprights out a little more or push them in closer together to match up…

view full answer...

Answer 8

The instructions for the Demco Tabless Base Plate Kit #DM77YV are being added to page but I'll also send them to you separately. In the instructions they only show that the air dam needs a chunk cut out and that the shutters would remain. The…

view full answer...

Answer 9

While we do not have a installation video for the Demco Tabless Base Plate Kit #DM77YV, we do have a video for the Roadmaster Direct-Connect Base Plate Kit #RM97RR which is very similar. I have linked the installation video near the bottom of the…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Gene, in order to find out what lift spacer you're going to need for your 2019 Ford F-150 you're going to need to measure the distance between the upper and lower mounting bracket and subtract the height of the spring. That number is going to…

view full answer...

Answer 12

Hey Gene, the good news is the RoadActive Suspension Custom Leaf Spring Enhancement Kit #RAS3611-YHD you have will work just fine any air bags you want to add since the air bags would mount under the frame and the RAS installs to the top of the leaf…

view full answer...

Are Crossover Tool Box Mounts Included with TracRac Pro2 Ladder Rack with Cab Extension TH37002XT-EX

Product Page this Question was Asked From

Continue Researching