How to Raise Suspension of Fleetwood 2004 TT Prowler

Question:

We are havingproblems backing inot and pulling out of our driveway. The skid bars drag and in one instance part of one broke off. I was wonderring if there is anything, I can do myself to raise the rear of our TT. We currently use 2 X10 mto place under the tires at the low spot of the driveway, this has helped but there stiol is some drag. thanks for your help.

asked by: Joe D

Expert Reply:

You can lift the trailer by moving the axles from being above the leaf springs to below the leaf springs.

The diameter of your trailer axle will determine the size of the parts that you will need to order. If your axle is 3 inches diameter, the Dexter Trailer Springs Over-Under Conversion Kit, # K71-385-00, would be a great choice and if your axle is 2-3/8 inch diameter you could use the Over-Under Kit, # K71-384-00. These kits can be installed without welding but the manufacturer strongly recommends having the new spring seat tacked in place on the other side of the trailer axle.

Some refer to this process as "flipping the axles," but since axle has a slight bow to it you can't just flip them and reinstall them under the springs using the same spring seats. You have to install new spring seats on the opposite side of the axle so that it can be moved below the spring.

expert reply by: Jameson C