Replacement Hub Compatible with Tandem Axle 1974 Prowler 24 Foot Trailer
Question:
I have a twin axle 24 ft 1974 prowler that has hub centric 15 inch wheels. I want to convert to 15 inch 5 lug with a 41/2 bolt pattern. What do I need to make that happen?
asked by: Ron G
Expert Reply:
To get you the correct parts, I will need you to pull off one of your hubs and check the inner and outer bearings for numbers. Normally there is a number printed on the face of the bearing and seal. If there is not a number that can be made out, then measuring the spindle with a digital caliper like # PTW80157 will give us the inner diameter of the bearings and seals we need to get your hub replacement. I've attached an article as well as a photo to assist with this.
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Continue Researching
- Q&A: Replacement Grease Seal 225255UC for 2015 Wesco Trailer
- Q&A: Can Dexter E-Z Flex Suspension Kit Replace Dexter 13-10 Equalizer
- Q&A: Replacement for a TDE LP8500 Boat Trailer Acuator
- Article: How to Survive the Winter In Your RV
- Q&A: RV Slide Topper Awning For A 154 Inch Slide Out Box
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Trailer Wiring Harness Recommendation for 2017 Lexus RX 350 with Towing Package
- Q&A: Does The LaSalle Bristol RV Roof Membrane Ship Folded Or Rolled Up
- Q&A: Recommended Replacement Hubs For BT-150 Trailer Idler Hubs
- Article: Most Popular Wheel Bearings
- Article: Testing Trailer Brake Magnets for Proper Function