Availability of Wesbar Wraparound Light # 105 825 -26 Replacement

Question

Question:

here's pictures!

asked by: Shelley F

0

Expert Reply:

Can I see a picture of the assembly you are refering to? I can't find any info on it.

expert reply by: Jameson C

0

click to enlarge

Shelley F.

8/26/2017

here's pictures!

Reply

Jameson C.

8/26/2017

Thanks for getting back to me with the pictures. From that I can tell you need the part # 271595 for the driver side and part # 271594 for the passenger side. I attached your picture plus one we got from a customer that shows this being used to replace a light just like yours.

Reply

Answer 1

For an LED replacement that is nearly identical to the Wesbar 105826 light you can use #STL36RB for the right side and #STL37RB for the left side. There are also versions that have a plug instead of just bare wires. For the right side use #STL36RPG…

view full answer...

Answer 2

I have a solution for you, but unfortunately the complete light kit the lens you referenced fits on is no longer available. Wesbar made the light assembly obsolete in 2011. The Wesbar Replacement Red Lens for Wrap Around Clearance Light #105825…

view full answer...

Answer 3

I recommend replacing your Tail Lights with the Drivers #STL37RPG and Passengers #STL36RPG lights as the Wesbar Lights and lenses are obsolete. The Optronics lights above will both use the same Tail Light Lens #A39RB if either side were to become…

view full answer...

Answer 4

We do have the both the fixture and bulb listed as the LED version which can be found as part #271594. The matching drivers side light is part #271595. Unfortunately the Webster 102640 bulb and 105826 lens are no longer available.

view full answer...

Answer 5

I checked with Wesbar and the lens only for the LED version of the tail lights you have is not available as a separate part but you can replace the light with #271595 for the left side of the trailer and #271594 for the right side.

view full answer...

Answer 6

The Wesbar trailer taillight uses a 1157 bulb like the #A1157B for an incandescent or #P231157R360 for an LED. LEDs are much brighter, last longer, and draw considerably less than incandescent.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 10

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Availability of Wesbar Wraparound Light # 105 825 -26 Replacement

Products Referenced in This Question

Featured Help Information

Miscellaneous Media

Continue Researching