Why Does Draw Tite Hitch for 1999 Honda Odyssey Have Higher Capacity than Curt
Question:
Why are the capacities of the Draw-Tite Class III Max Frame Round Tube Receiver Hitch - 1999 Honda Odyssey Code: 75270 so much greater than those of the Curt Class III Round Tube Receiver Hitch - 1999 Honda Odyssey Code: C13068? Thanks.
asked by: Daniel M
Expert Reply:
Draw Tite and Curt are two different companies who both designed a Class III hitch for your 1999 Honda Odyssey.
Before getting to concerned about the capacity differences you need to consider that the towing setup of any vehicle is only as strong as the weakest component. So if your Odyssey has a factory capacity that is much lower than either hitch's capacity it doesn't matter which you had installed as the lower vehicle capacity would be the overall capacity.
The design of the # 75270 and # C13068 are pretty similar but also have a few differences. One of them being that the Draw Tite has a much longer mounting bracket surface that touches the vehicle frame.
I attached two pictures. The first one (on the left) is the Draw Tite and you can see how much bigger the bracket is than the Curt on the right.
Products Referenced in This Question
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 675 lbs TW
- 4500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 675 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Trailer Hitch
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: Trailer Wiring
- Shop: etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
- Shop: EcoHitch Stealth Trailer Hitch Receiver - Custom Fit - 2"
- Shop: Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Shop: 20x59 Curt Cargo Carrier for 2" Hitches - Steel - Folding - 500 lbs
- Search Results: no drill
- Search Results: no~drill mount for electrical mounting bracket
- Video: Trailer Hitch Installation - 2011 Honda Odyssey - Curt
- Video: Draw-Tite Max-Frame Trailer Hitch Installation - 2015 Honda Odyssey
- Video: Tow Ready 4-Pole Mounting Bracket Installation
- Video: Trailer Wiring Harness Installation - 2014 Honda Odyssey 118521
- Video: Trailer Hitch Installation - 2016 Honda Odyssey
- Video: Viking Solutions Tilt-N-Go II Hauler and Cargo Carrier Review
- Video: etrailer 24x60 Folding And Tilting Cargo Carrier Review
- Q&A: Trailer Hitch, Ball Mount, Ball, and Wiring Harness for a 2014 Honda Odyssey
- Q&A: Height of the Curt Hitch # C13068 from Hitch to Ground on a 2007 Honda Odyssey
- Q&A: Will Weight Distribution System Allow Honda Odyssey with Class III Hitch to Tow Camper
- Q&A: Tools Needed When Installing Trailer Hitch On 2015 Honda Odyssey
- Q&A: Is There a Hitch for a 2009 Honda Odyssey That Has a Crossbar That is Hidden Behind the Bumper?
- Q&A: Trailer Hitch and Wiring for a 2015 Honda Odyssey Touring Elite
- Article: How to Measure for Trailer Hitch Drop
- Shop: Suspension Enhancement
- Article: Which Hitches are Made in the USA
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class
- Article: My Trailer Hitch Doesn't Fit