Recommended Replacement Axle for 2007 Carry On Enclosed Trailer
Question:
I have a ten year old 2007 Carry On 5*10 enclosed trailer that the previous owner told me the axle has never been serviced/greased, the tires are original, and they have never been taken off! The lugs are rusted and I cant imagine the bearings being in good shape. For the peace of mind Id rather swap out the entire axle, wheels and tires on it. The body/frame of the trailer are in good shape, not rotted. Ive determined based on a few searches that axle 3K7258 should fit up. However Im hoping to find a Dexter match with the EZ Lube system. Do you offer one of these that would fit up given the specs of this model? Im hoping to keep the existing leafs but would replace those as well if needed/more convenient.
asked by: William C
Expert Reply:
I may have a solution for you, however we do not currently have a 3,500 pound standard trailer axle that matches the dimensions for the model that you referenced.
I recommend looking into an Axle-Less Trailer Suspension System like the Timbren # ASR3500S06. This system will provide a smooth, quiet, safe ride and can eliminate the need for an axle. This will provide a 3,500 pound weight capacity along with a 4 inch lift to provide greater ground clearance. The EZ Lube spindles will accept compatible hubs like the etrailer.com # AKHD-545-35-EZ-K.
I have attached an installation video so you can see exactly how this system installs and operates.
Products Referenced in This Question
Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - 4" Lift - 4 Bolt Flange - 3,500 lbs
- Trailer Axles
- Rubber Spring Suspension
- Easy Lube Spindles
- No Hubs
- 3500 lbs
- Spindles Only
- Universal Fit
- Lift - 4 Inch
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How Many Grommets Come with Replacement Trivet Support Bumper for Furrion Cooktop
- Q&A: What Does the Manual Wizard Button Do on the Progressive Dynamics Power Control Center PD4135K?
- Q&A: 2020 Aliner Expedition Suspension Upgrade for Dexter 3,500 lb Torsion Axle
- Q&A: Availability of 3500 lb Timbren Axle Less Kit with 4 inch Lift
- Q&A: How to Identify Trailer Axles
- Q&A: What Type of Frame Clearance will Timbren Silent Ride TSR7000T05 Have
- Q&A: Is There Trailer Axle Over Under Kit that Could Fit 5x8 Utility Trailer
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Determining Trailer Tongue Weight
- Article: Overview of Lubricating Grease
- Article: Trailer Lighting Requirements
- Article: Trailer Tire Sizing
- Article: Testing Trailer Brake Magnets for Proper Function