Hub Recommendation for EZ Load Boat Trailer with Number 42 Spindle
Question:
I have a 7500# ez- load boat trailer, serial# IZEAANTG76AD12041. MODEL-TEZB-23-25/27.It has 4 12 inch 6 hole wheels at 5 1/2.Hubs are Hd-1206. They are oil bath.The oil seal is #tmc-21334tc.The outer bearing is a LM-57048 measures 1.224 , as close as I could read it. The axle on the inside measures 1-750 or 1 and 3/4 inches.When I tried to order they said I needed the axle capacity.EZ- load is hard to get to.I would like to find out what size brake assembly that will work well for me. Thank You
asked by: Larry H
Expert Reply:
Thanks for the dimensions of your spindle. From that I can tell you have the number 42 spindle which is a very common one. For a hub that will fit your spindle and has the 6 on 5-1/2 inch bolt pattern you need the etrailer.com hub part # AKHD-655-6-EZ-K would be what you would need.
This is a grease hub though which will work on your current spindle but you would fill it with grease and not oil. Many prefer grease as if you were to blow an oil seal the hub is toast and you are stranded whereas with a grease hub if the seal goes out you can easily make it home without ruining the hub/spindle.
For brake assemblies you would want the part # AKEBRK-7L-SA for the left hand side and # AKEBRK-7R-SA for the right hand side.
Products Referenced in This Question
Electric Trailer Brake Assembly - Self-Adjusting - 12" - Left Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- LH
- 5200 - 7000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Electric Trailer Brake Assembly - Self-Adjusting - 12" - Right Hand - 5,200 lbs to 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Electric Drum Brakes
- RH
- 5200 - 7000 lbs
- Brake Assembly
- Self Adjust
- 12 x 2 Inch Drum
- etrailer
more information >
Product Page this Question was Asked From
Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Easy Grease
- EZ Lube
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Replacement Brakes for a 5th Wheel Trailer with 5.2K Lippert Axles
- Article: Most Popular Wheel Bearings
- Article: Trailer Tire Sizing
- Q&A: Replacement Drum Brake Actuator for a 1995 4 Winns Model 3916 Trailer
- Article: Trailer Wiring Diagrams
- Q&A: Can a Hub with Outer Bearing 15123 and LM67048 Both Fit Same Spindle
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: How to Measure the Bolt Pattern of a Trailer Wheel
- Q&A: Replacement Recommendation for Dexter Axle 8-201 Hub Assembly on Older Horse Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Replacement For A Truryde RVD-H-65535 Hub
- Q&A: Replacement Hub and Drum Assembly for Trailer With 5,100 lb Dexter Axle
- Q&A: Installing Castle Nut in Hub and Drum Assembly