How Does the Single-Axle Trailer Hanger Kit #APS6SE Work with 1.75 Inch Slipper Springs
Question:
With APS6SE, can you use it with 1.75 inch slipper springs? APS6SE also indicates that the mounts can be used with 1.75 inch slipper springs. How is this accomplished? Thanks
asked by: Kyle
Expert Reply:
To assemble a slipper spring suspension system, you'll need several components: the hangers and bolts (included in the kit APS6SE); slipper springs, such as the 1.75 inch # e33SR; spring seats such as # TRSS300; and a U-bolt mounting kit such as # # APUBR-8.
The 1.75 inch springs attach the same as 2 inch springs would. The hangers attach the springs to your trailer frame. The U-bolt plates attach the springs to the axle. The spring seat welds onto your axle to provide additional support.
I've attached an article on slipper spring systems for you to check out. I've also attached a slipper spring installation video as well as several product review videos.
Products Referenced in This Question
U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7" Long U-Bolts
- Trailer Suspension Parts
- U-Bolt Kits
- Camper
- Car Hauler
- Utility Trailer
- 5200 lbs - 7000 lbs
- Round Axle - 3 Inch
- 1/2 Inch Diameter
- 7 Inch Long
- Dexter
more information >
etrailer Rust-Resistant 4-Leaf Slipper Spring for 4,300-lb Trailer Axles - 26-1/4" - Dacromet
- Trailer Leaf Springs
- Slipper Springs
- Open Eye
- 4300 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 26-1/4 Inch Long
- Dacromet
- etrailer
more information >
Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter
- Trailer Suspension Parts
- Spring Seats
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Round Axle - 3 Inch
- TruRyde
more information >
Product Page this Question was Asked From
Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 3-3/4" Tall Front
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Single Axle
- etrailer
more information >
Continue Researching
- Article: What is Overlanding? How to Start your Overlanding Journey
- Q&A: Will Coil SumoSprings Custom Helper Springs Fit a 2018 Toyota Highlander
- Article: RV Cell Boosters, How Do They Work?
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Selection of Special Trailer Tires for 5th Wheel Trailer to Avoid Blowouts
- Q&A: How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?
- Q&A: Will Swagman Bike Rack Fit Spare Tire with Hard Plastic Cover
- Q&A: How To Charge 12v Batteries Wired in Parallel
- Q&A: Using NOCO 2 Bank Charger With Parallel Batteries in Truck
- Q&A: Recommended 7000lb Leaf Springs To Replace Dexter 072-027-00
- Article: Trailer Wiring Diagrams
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Replacing RV Awning Fabric: Your Step-by-Step DIY Guide