Availability of a Forged Ball Mount with a 6 inch Rise
Question:
Is there a forged ball mount with a 6 rise available? If so what is the pt # and how much? Thanks!
asked by: Frank
0
Expert Reply:
Out of the ball mounts we carry that the manufacturers have labeled as being forged, the closest one to a 6 inch rise is going to be # 40332, that you have referenced. To get that additional inch, you could use a ball with a 1 inch rise like # C40035. This is a 2-5/16 inch diameter ball with a 1 inch rise and 10,000 pound capacity.
expert reply by:
Michael H
0
Products Referenced in This Question
2-5/16" Hitch Ball - 1" Rise - 1-1/4" Diameter x 2-5/8" Long Shank - 10,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Hi-Rise Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Product Page this Question was Asked From
Draw-Tite Ball Mount for 2" Hitches - 5" Rise, 6" Drop - 10-1/4" Long - 16K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1-1/4 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 16000 lbs GTW
- Class IV
- Draw-Tite
more information >
Continue Researching
- Q&A: Replacement Al Ko 10k Brake Calipers and Brake Pad Recommendation
- Q&A: How to Make Fulton A60 Swinging Coupler Compatible with Disc Brakes
- Article: How to Measure for Trailer Hitch Drop
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Availability of Brake Line Fitting to go from 1/8 inch Male NPT to 3/16 Female FIF
- Q&A: Can a Trailer Ride With the Tongue at an Upward or Downward Angle
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Recommended Ball Mount With 5-1/2 Inch Rise For 2-Inch Hitch
- Article: Ball Mount Basics: Weight Capacity, Class, and Size
- Q&A: What Size Studs Will the Replacement 13" Rotor for Dexter Disc Brakes Work With
- Q&A: Trailer Hitch Ball Wrench Size and Torque Rating for 1-1/4 Inch Hitch Ball Shank Size
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub