How to Select Replacement Hub/Drums and Brakes
Question:
Looking for Trailer hub and drum assembly but cannot find what I need. The 8-201-9UC3-EZ is close but I need it for a 2.250inch seal. I would also like to purchase brake assemblies as well. The bolt hole pattern is 6 x 5.5 If you could point me in the right direction I would appreciate it. Thanks.
asked by: Dennis B
Expert Reply:
When you need to select replacement hubs/drums you want to match up a few things; the axle weight rating, the hub/drum size, the bearings used in the hub and the wheel bolt pattern.
A new hub has to use the same inner and outer bearings in order for it to fit properly on your spindles, and of course it also has to be rated to match the axle capacity - for an example, a 2000-lb axle will need two hubs each rated for 1000-lbs.
On the page I linked for you are displayed the 6-on-5-1/2 hub/drums we offer. Select your axle weight rating to see the available items. For instance, part # 8-201-5 is a 12 x 2-inch hub/drum for 5200-lbs axles that fits spindles that use a 2.250-inch seal. The bearings, # 25580 and # LM67048, need to be ordered separately, as do the seal # RG06-090 and grease cap # RG04-080.
Electric drum brakes in this 12 x 2-inch size are shown on the other linked page. Again you need to match the axle weight rating, and also the brake flange mounting pattern. You can also choose standard or self-adjusting brakes. Be sure to select both left- and right-hand brakes.
Products Referenced in This Question
Replacement Trailer Hub Bearing - 25580
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.750 Inch I.D.
- Bearing 25580
- Race 25520
- 10000 lbs Axle
- 6000 lbs Axle
- 7000 lbs Axle
- 8000 lbs Axle
- 9000 lbs Axle
- etrailer
more information >
Trailer Hub and Drum Assembly - 5,200-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- 25580
- LM67048
- For 5200 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Replacement Trailer Hub Bearing - LM67048
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.250 Inch I.D.
- Bearing LM67048
- Race LM67010
- 5000 lbs Axle
- 6000 lbs Axle
- etrailer
more information >
Grease Cap, 2.44" OD Drive In with Plug - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- E-Z Lube Grease Cap
- 2.441 Inch O.D.
- TruRyde
more information >
10-10 Grease or Oil Double-Lip Seals - Qty 2
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 2.125 Inch I.D.
- 3.376 Inch O.D.
- TruRyde
more information >
Product Page this Question was Asked From
Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- 25580
- 15123
- For 5200 lbs Axles
- For 6000 lbs Axles
- 6 on 5-1/2 Inch
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Availability Of Hub/Drum Kit With Brakes And Hardware Similar To Part BPH1206EPR
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: Replacement Recommendation for Dexter Axle 8-201 Hub Assembly on Older Horse Trailer
- Article: Trailer Tire Sizing
- Q&A: Recommended Nev-R-Adjust Brakes for a 6k Dexter Axle
- Q&A: Replacement For A Truryde RVD-H-65535 Hub
- Q&A: Replacing Mobile Home Trailer Hub With a Hub that is Compatible with Standard Rims and Tires
- Q&A: Recommended Spare Hub/Drum For A Dexter D52 Axle
- Q&A: Does Dexter Trailer Hub and Drum Assembly Include E-Z Lube and Standard Grease Cap
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer