Vehicles Suitable for Using Hitch Motorcycle Carrier with Total TW of 650+ Pounds
Question:
Im hoping to purchase a vehicle and install a trailer hitch that will allow me to install a hitch mounted motorcycle carrier to hold a Kawasaki KLR 650 which weighs about 460 lbs. Before purchasing the hitch from you all, I need to make sure I get a vehicle that can handle it. Could you please tell me some makes and models that would be suitable? Thanks.
asked by: Daniel
Expert Reply:
Most passenger vehicles have a tongue weight (TW) capacity - TW is downward force on the frame - that usually ranges from a low of about 150-lbs up to about 500-lbs. Larger pickups that have a much higher towing capacity will naturally also have a higher TW rating since their frames are built to be much stronger.
TW for a hitch is usually rated at 10-percent of the towing weight limit for that hitch. For example, the 2-inch Class IV Curt hitch # C14355 has a tow rating of 10K and a TW rating of 1K. This hitch various versions of the Ford F-series pickups. For a motorcycle that weighs close to 500-lbs, and for the hitch-mounted carrier for it, which could easily weigh another 100-lbs, I recommend a hitch and vehicle rated for no less than 750-lbs TW. A tongue weight rating of 1000-lbs would be better still, of course.
Hitch makers typically engineer their aftermarket hitches to closely match the capacity of the host vehicle it will be mounted on. There would be no sense/benefit making a hitch that can handle 2K-lbs TW for a vehicle whose frame can only handle 1K-lbs. Just the same, just because there is a hitch rated for 1K TW made for a certain vehicle that does not automatically guarantee the vehicle shares that exact same rating.
I suggest you plan on using a 2-inch Class IV hitch and a pickup truck to ensure you have a good safety margin. But if that is not possible some Class III hitches, like the Curt # C13182 that fits select model years of the Dodge Durango and Jeep Grand Cherokee, still gives you a 750-lbs TW rating. For this same Durango example vehicle Draw-Tite offers a 900-lb-TW Class III hitch # 75713.
One thing to keep in mind is that having a 750-lb cargo load suspended from a rear hitch will definitely tend to cause some rear-end sag. You may want to consider a rear axle suspension enhancement kit, especially if the vehicle is older. These kits include air bag systems, rubber jounce springs from companies like Timbren and SuperSprings that simply bolt up in place of the factory bump stops, and also helper leaf spring kits. All work to help compensate for that saggy rear end caused by the TW of the hitch-mounted carrier and motorcycle. I would urge you to plan on using one type of kit or another.
Products Referenced in This Question
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 900 lbs TW
- 6000 lbs GTW
- 7500 lbs WD GTW
- 2 Inch Hitch
- 900 lbs WD TW
- Visible Cross Tube
- Draw-Tite
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 6000 lbs GTW
- 7500 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 1000 lbs TW
- 10000 lbs GTW
- 12000 lbs WD GTW
- 2 Inch Hitch
- 1200 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Adding 4- and 7-Way Trailer Connector to 2003 Ford F-150, Wiring Electric Utility Winch on Trailer
- Q&A: Adding a 4- and 7-Way Trailer Connector to a 2003 Ford F-150 with 4- and 5-Way Connectors
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Best Bike Racks for Electric Bikes
- Q&A: Brake Controller Installation on a 2007 Ford Expedition with Factory 4-Way Wiring Harness
- Q&A: 7-Way Relocation Option for 2014 Ford F-250 Installing Curt Hitch 14335
- Q&A: How To Install Trailer Brake Controller On 2002 Country Coach Motorhome W/ Air Brakes
- Q&A: Which Curt Class III Trailer Hitch Receiver Should I Get For My 1999 Ford F-150 Pickup?
- Q&A: What Is The Width Of The Curt Trailer Hitch Receiver 13359?
- Article: Determining Trailer Tongue Weight
- Article: Trailer Wiring Diagrams
- Article: My Trailer Hitch Doesn't Fit
- Article: Steel vs. Aluminum Ball Mounts