Class I Hitch and Class I Hitch Bike Rack for 2016 Honda Civic Coupe
Question:
Hi, Ive got a 2016 Civic Coupe LX-P. Im looking at the installation guideis it really necessary to trim metal from the bumper? what gets in the way if you dont? And do you have recommendations for which bike racks will fit AND clear bumper? It looks like the hitch is a close fitwhich I really like.... Thanks.
asked by: Aaron D
Expert Reply:
The Class I hitch made for your 2016 Honda Civic Coupe, the Curt # C92UR, will require trimming of the rear bumper and fascia panel. No metal on the bumper needs to be trimmed away.
Even though Curt recommends using their support strap # 18050 with any non-trailer load (such as a bike rack), it is not required on this hitch.
Class I hitches are limited to using 2-bike racks. On the linked page you will see all Class I 2-bike hitch racks. For a 2-bike carrier that is cost-effective, lightweight, capable of use in both 1-1/4-inch and 2-inch hitches and that provides substantial clearance from the hitch pin hole (a full foot) I like the Curt # C18085. This rack also has a 90-lb total bike weight rating, more than most.
You can use hitch lock # e98879 to secure the rack and bike cable lock # e98891 to lock your bikes.
Products Referenced in This Question
Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1
- Accessories and Parts
- Hitch Bike Racks
- Hitch Cargo Carrier
- Tie Down Straps
- CURT
more information >
Curt 2 Bike Platform Rack - 1-1/4" and 2" Hitches - Frame Mount - Tilting
- Hitch Bike Racks
- Platform Rack
- Folding Rack
- Tilt-Away Rack
- Frame Mount
- Bike Lock
- 2 Bikes
- Class 1
- Class 2
- Class 3
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- CURT
more information >
etrailer Cable Lock - 10' Long - 5/16" Diameter - Steel - Keyed Alike
- Cable Locks
- Utility Lock
- Keyed Alike
- Steel
- 10 Feet Long
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class I
- 200 lbs TW
- 2000 lbs GTW
- 1-1/4 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Recommended Lithium Battery Compatible Power Converter For Parallax 7355
- Article: How to Charge a Dump Trailer Battery
- Q&A: Replacement for Demco Master Cylinder 05680-C for Drum Brakes
- Q&A: 05680-C Master Cylinder Replacement for Trailer Recommendation
- Q&A: Recommended Components for Off-Road Trailer Similar to Chevy Colorado Wheels
- Q&A: Replacing Parallex 7345 Converter to One that is Compatible with Lithium Batteries
- Q&A: Recommended Replacement For A WFCO WF-8750P Power Center
- Q&A: Is There Down Side to Progressive Dynamics 4000 Series 60 Amp Over 45 Amp
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Hitch Receiver Sizes
- Article: How to Measure for Travel Trailer and Fifth Wheel Steps
- Article: What is Boondocking
- Article: Cleaning Your RV Black Water Tank in 4 Easy Steps
- Article: How to Choose the Right Trailer Hitch Class