Replacement Weight Distribution Shank to Provide More Height Rise or Drop
Question:
Have a curt 17500 weight distribution hitch need one and a half inch more
asked by: Timothy E
Expert Reply:
If you are referring to needing more rise or drop from the shank part of your Curt weight distribution system to allow your hitched trailer to remain level as it needs to in order to handle well, then you can refer to the linked page that displays all WD shanks that fit a 2-inch hitch receiver. I also linked the same parts for a 2-1/2-inch receiver size in case that is what is on your truck.
These shanks range in the amount of rise or drop they offer. For instance, 2-1/2-inch Curt shank part # C17132 will give up to 9-1/4-inches of drop with the trunnion bars from system # C17500. The 2-inch shank part # C17124 provides up to 9-inches of drop, and part # C17125 provides up to 15-3/4-inches of drop with a trunnion bar system like yours.
Products Referenced in This Question
Curt Weight Distribution Shank 13" Long - 9" or 10" Drop - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1600 lbs TW
- 16000 lbs GTW
- Fits 2 Inch Hitch
- Round - 9 Inch Drop
- Trunnion - 7 Inch Drop
- CURT
more information >
Curt Weight Distribution Shank - 12" Long - 15-3/4" or 16-1/4" Drop - 1,500 lbs TW
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2 Inch Hitch
- Round - 16 Inch Drop
- Trunnion - 15 Inch Drop
- CURT
more information >
Curt Weight Distribution Shank for 2.5" Hitches - 9-1/4" or 10" Drop - 13" Rise
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- 1500 lbs TW
- 15000 lbs GTW
- Fits 2-1/2 Inch Hitch
- Round - 10 Inch Drop
- Trunnion - 9 Inch Drop
- Round - 13 Inch Rise
- Trunnion - 13 Inch Rise
- CURT
more information >
Product Page this Question was Asked From
Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 900 lbs
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: Determining Trailer Tongue Weight
- Q&A: What 2" Hitch Ball Will Fit The Curt TruTrack 2P Trailer Mounted Weight Distribution System # C67ZV?
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Q&A: What Style of 7-Way Plug Does the Electric Jack w/ Footplate and 7-Way Plug Use
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Q&A: Which Mirror Monitor Will Work With The Rear View Safety Backup Camera System # RVS-770613-213?
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Weight Distribution Solution for Trailer that Has Angle Iron Frame Design
- Q&A: Timbren Suspension Enhancement Options For A 2023 Toyota Tundra TRD PRO
- Q&A: What Size Socket is Needed For 2-5/16 Inch Hitch Ball
- Q&A: Base Dimensions of Empire Faucets RV Kitchen Faucet w/ Pull-Down Spout
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)