Solution for 12 Volt Power Pin of 2015 Ford Transit Not Carrying Full 12 Volts
Question:
3.5 Volts from 7 way Factory installed 1:00 pm pin : 2015 Ford Transit 250. 14.6 volts from pin at 5:00 position. No pin reads 12 volts?? 2016 R-Pod 180 All lights work fine on exterior of RVIm I charging Rv batteries going down the road?
asked by: William
0
Expert Reply:
The 1:00 pin position of a 7-way is the 12 volt power source. If yours does not carry the full 12 volts there you might try checking it with the key of the vehicle on as well.
Or you can bypass the factory wiring by running a 10 gauge wire like part # 10-1-1 through a breaker like part # 9510 to the positive post of the battery and you'll pull the 12 volts directly.
expert reply by:
Jameson C
0
Products Referenced in This Question
Product Page this Question was Asked From
40 Amp In-Line Circuit Breaker - Perpendicular Mount Bracket
- Accessories and Parts
- Wiring
- Circuit Breaker
- 40 Amp
- Pollak
more information >
Continue Researching
- Shop: Trailer Wiring
- Q&A: Solution to Activate 12 Volt 7-Way Trailer Circuit on 2017 Ford F-250
- Shop: 7-Way Trailer Adapter for Towing Trailers with LED Lights
- Q&A: Ford F-250 12v Circuit on 7 Way Trailer Connector is Not Powering Up Unless Truck Is Running
- Q&A: No Auxiliary Power On a 2015+ Ford F-Series Pickup
- Q&A: Leveling Trailer Information to Prevent Trailer Sway
- Q&A: Is a Fuse Needed on 12 Volt Power Circuit of Trailer Wiring
- Video: Review of Curt 7-Way LED Trailer Light Adapter - C57003
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: Can Spare Tire Stay on 2022 Dodge Durango Using Draw-Tite Hitch DT38MR
- Q&A: What Gauge Wire Is Needed To Run Charge Line for Battery From Truck to Trailer
- Article: Stability Control for Heavy Duty Vehicles
- Article: Wiring Trailer Lights with a 6-Way Plug (It's Easier Than You Think)