Hub and Drum Assembly Recommendation
Question:
I have L44649 as outer bearing and L44610 as outer race. inner bearing is L68149. grease cap is 1.986. which hub and which brake drum will wok ? thanks.
asked by: William
Expert Reply:
For an idler hub I would recommend that you get a Trailer Hub Assembly, part # 84545BX. This hub has the same inner/outer bearings and seal size as your current hub so it would work well for you.
For a brake hub I would recommend that you get a Trailer Hub & Drum Assembly, part # 84557UC3.
Both these drum assemblies use the same bearing and seal size that came off of your old hub, so this will work on your spindle perfectly.
Products Referenced in This Question
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" - 5 on 5-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 5-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 2,200-lb Axles - 5 on 4-1/2
- Trailer Hubs and Drums
- Hub
- Standard
- L44649
- L44649
- For 2000 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Continue Researching
- Q&A: How to Determine the Size of a Trailer Hub Assembly for Replacement
- Article: Most Popular Wheel Bearings
- Q&A: How to Tell if Trailer has a BT8 or BTR Spindle Installed
- Q&A: Replacement Hub, Bearing, and Grease Seal Kit for a UFP H-1062-3 Axle
- Q&A: What is the Length of the Trailer Idler Hub Assembly # TA88545-2
- Q&A: Which Hubs Can Be Used to Replace the Hubs on a UFP H-1062-3
- Q&A: Solution to Replace 8k Kodiak XL NevR Lube Hub Drums
- Q&A: Cross Referencing 10-9 Replacement Grease Seals for Aliner Trailer
- Article: Trailer Wiring Diagrams
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: Trailer Tire Sizing
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Where to Position the Trailer Axle?
- Article: Measuring a Trailer Tire