Recommended Trailer Hitch for 2006 Chrysler Pacifica
Question:
Will a curt 13362 fit a 2006 Christer Pacificam
asked by: Maurice
Expert Reply:
I do have a solution for you, however the Curt Trailer Hitch Receiver # C13362 referenced in your question is not designed to fit your 2006 Chrysler Pacifica.
I instead recommend looking at the Curt Trailer Hitch # 13529. This Class III hitch is confirmed to fit your vehicle and will provide a 2 inch receiver opening with a gross trailer weight capacity of 3,500 pounds. No drilling will be required for installation. Keep in mind that the exhaust and spare tire will need to be temporarily lowered. I have attached the installation details that you can look through.
If you are planning on doing any towing and your Pacifica does not already have a factory 7-Way connector installed, I recommend the Tekonsha T-One Vehicle Wiring Harness # C55530. This harness is custom fit for your vehicle and will plug directly into the ports behind the driver and passenger side tail lights to provide a 4-way connector at the rear of the Pacifica. I have included an installation video on your vehicle that you can use for reference.
I have also attached an article that explains how to determine the correct size ball mount for you tow your trailer level along with a link that will take you to our available selection.
Products Referenced in This Question
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 400 lbs TW
- 4000 lbs GTW
- 2 Inch Hitch
- Concealed Cross Tube
- CURT
more information >
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >