B&W Model 3000 5th Wheel Replacement U-Bolts

Question

Question:

Need replacement Ubolts B&W model 3000 fithwheel replacement Ubolts

asked by: Cody C

0

Expert Reply:

I believe you are looking for the safety chain U-bolts for your B&W hitch. They are the Replacement Safety Chain U-Bolt Kit for B&W Gooseneck Hitches # BW1900-2-1600.

expert reply by: Jason S

0

Answer 1

The model of B&W Companion 5th wheel hitch you have is the older one that used U-bolts. And while I'm sure it has aged gracefully for the most part, if you have U-bolts that need replacement the only option is to convert your hitch to the new…

view full answer...

Answer 2

Replacement Safety Chain U-Bolt Kit for B&W Gooseneck Hitches #BW1900-2-1600 is what you would need for your B&W Companion Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 20,000 lbs #BWRVK3500. You can check out the attached…

view full answer...

Answer 3

The biggest difference is that from the RVK3000 to the Companion #BWRVK3500 the capacity was upgraded from 18,000 lbs to 20,000 lbs. The height adjustability also changed from 14-3/4 inch-16-3/4 inch to 16-1/4 inch-18-1/4 inch. The post that attaches…

view full answer...

Answer 4

B&W re-designed the RVK3400 hitch with a little bit different styling and changed the part number to the RVK3405. Our part #BWRVK3400 is the RVK3405 but we just didn't change our part number.

view full answer...

Answer 5

No. Since the Companion hitch has a square tube that mounts into a gooseneck connection you will only be able to mount a B&W Companion hitch like the #BWRVK3500 in the gooseneck ball mount of the B&W Turnoverball like #BWGNRK1012.

view full answer...

Answer 6

If you are looking for the replacement U-bolts for the safety chains of the B and W Turnoverball you'd want the part #BW1900-2-1600.

view full answer...

Answer 7

The U-bolt in the B&W Replacement Safety Chain U-Bolt Kit, #BW1900-2-1600, measures 3-1/4 inches long x 2-1/2 inches wide. The inside measurement of the U-bolt is 1-9/16 inches. The U-bolt is also 1/2 of an inch in diameter. The attached photo…

view full answer...

Answer 8

For your companion hitch the replacement pivot arms are now only available with the base which for your model 3000 is #BWRVB3500. I'm not sure what u-bolts you are referring to, so I assume it is the chains and that is part #BW1900-2-1600. If you…

view full answer...

Answer 9

For your B&W Companion Slider Gooseneck-to-5th-Wheel Trailer Hitch Adapter - Dual Jaw - 20,000 lbs #BWRVK3400 that draw down bolt is 1/2" x 3-1/2". We don't have the factory bolt and washer replacement, but you can use a grade 5…

view full answer...

Answer 10

You could use the Tow Ready Base Rail Lock for 5th Wheel Trailer Hitches #TR63254 as a locking saddle pin for the B and W Companion fifth wheel hitch.

view full answer...

Answer 11

Indeed it is, and we do in fact have the correct replacement for the pin to connect the head of the B&W Companion to the arms, which is the following part number: - Replacement Saddle Pin for B&W Companion 5th Wheel Trailer Hitches…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

B&W Model 3000 5th Wheel Replacement U-Bolts

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching