Recommended Hub/Drum For UFP Boat Trailer
Question:
Do you have a replacement for a UFP 10inch boat trailer hub/drum, number HD-1377? It takes an L68110 race, where most standard drums use the L6811. I dont want to have to keep track of mixed parts.... Thanks
asked by: Spotter
Expert Reply:
The race you mentioned in your hub is for bearing # L68149 which is a common size. The inside diameter of that bearing is what matters most as other races can be used with different hubs without issue. The spindle measurements are the ones that need to match. It sounds like you have a standard 3500 lb axle that the Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # AKHD-545-35-K will fit. The race makes the bearing compatible with the hub, so you don't need to worry about that part being different.
I've attached a photo of how to measure the spindle so you can double check it if you wish with a digital caliper like # PTW80157.
Products Referenced in This Question
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Product Page this Question was Asked From
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Shop: Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2
- Shop: etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Search Results: l68149
- Search Results: spindle wear sleeve
- Search Results: spindle wear sleeves
- Search Results: axle grease seal
- Search Results: grease seal
- Video: Review of Demco Brake Actuator - Master Cylinder Repair Kit - DM24ZR
- Shop: Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Shop: Grease Seal
- Q&A: 2800lbs Axle Replacement Seal
- Search Results: electric brake wire
- Search Results: h1377
- Q&A: Replacement Hub for a UFP H-1377 on a 2004 Tahoe Boat Trailer
- Q&A: What is the Proper Gauge Wire for Installation of a Brake Controller and Trailer Brakes
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Recommended Replacement for Atwood Surge Brake Actuator 85778
- Q&A: Replacement for Atwood Surge Brake Actuator 82541
- Q&A: Solution for Needing Replacement Atwood Master Cylinder for Surge Actuator
- Video: etrailer Trailer Hub and Drum Assembly Installation AKHD-545-35-K
- Video: etrailer Hub And Drum Assembly Installation