Hitch Mounted Cargo Carrier Recommendation for a 2007 Subaru Tribeca
Question:
I have a 2007 Subaru Tribeca. Id like to get a cargo carrier. I have a 2 receiver installed. The carrier would be used mostly for luggage. Recommendations?
asked by: Steve L
Expert Reply:
For your 2007 Subaru Tribeca I would recommend you get a etrailer Products Hitch Cargo Carrier, part # e98874. This carrier has a folding mechanism in it to allow it to be up and out of the way when you are not using it.
This carrier measures 19-1/2 inches from the center of the hitch pin hole to the closest edge of the carrier when down, and 9-1/2 inches from the center of the hitch pin hole to the closest edge of carrier when folded up. I would measure from the center of your hitch pin hole out to the furthest point on your Tribeca to determine if you have clearance to use this carrier when it is in the up position.
I attached a review video of this product below for you to check out.
You might also be interested in purchasing an Anti-Rattle Device and Lock for 2 inch hitches.
If the ball mount you're using is hollow, the Let's Go Aero locking anti-rattle hitch pin, part # 63232 would work great. The square block and spring would insert into the end of the hollow shank of the ball mount with the spring and the hole in the block lining up with the hitch pin hole.
A second option is the Roadmaster Quiet Hitch, part # RM-061. The Quiet Hitch bolts around the junction of the ball mount and the receiver tube, locking the two together.
Products Referenced in This Question
Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" Span
- Trailer Hitch Lock
- Universal Anti-Rattle Lock
- Keyed Unique
- Fits 2 Inch Hitch
- Spring-Loaded Pin
- 3-1/2 Inch Span
- Lets Go Aero
more information >
24x60 etrailer Cargo Carrier for 2" Hitches - Steel - Tilting - Folding - 500 lbs
- Hitch Cargo Carrier
- Flat Carrier
- Tilting Carrier
- Folding Carrier
- 24 Inch Wide
- Heavy Duty
- Fits 2 Inch Hitch
- 60 Inch Long
- Class III
- Class IV
- Steel
- etrailer
more information >
Roadmaster Quiet Hitch for 2" Trailer Hitches
- Hitch Anti-Rattle
- Standard Anti-Rattle
- Universal
- Fits 2 Inch Hitch
- Sleeve Style
- Accessory Anti-Rattle
- Towing Anti-Rattle
- Roadmaster
more information >
Product Page this Question was Asked From
17x46 Curt Cargo Carrier for 1-1/4" and 2" Hitches - Steel - 500 lbs
- Hitch Cargo Carrier
- Flat Carrier
- Fixed Carrier
- 20 Inch Wide
- Heavy Duty
- Fits 1-1/4 and 2 Inch Hitch
- Fits 1-1/4 Inch Hitch
- Fits 2 Inch Hitch
- 48 Inch Long
- Class I
- Class II
- Class III
- Class IV
- Steel
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: What Hitch Do You Recommend for a 2024 Toyota RAV4?
- Q&A: Height of Timbren Rear Suspension Enhancement System # TGMRCK25D
- Article: Rooftop Cargo Carriers
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: Cargo Tie-Down Methods
- Q&A: Dimensions of the Curt Trailer Hitch item # C96CR
- Article: My Trailer Hitch Doesn't Fit
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Does Trailer Hitch For 2024 Hyundai Venue Have Concealed Crosstube
- Q&A: Enclosed Hitch Cargo Carrier Recommendation for Clearing Rear Spare of Jeep Wrangler
- Q&A: Least Visible Hitch for a 2022 Chevy Spark
- Article: Routing the Power Wire for a Trailer Wiring Harness
- Article: Ball Mount Basics: Weight Capacity, Class, and Size