Will The Draw-Tite Class III 2 Inch Hitch # 75099 Fit A 1998 And 1999 Chevrolet C/K Series Truck
Question:
I have a 1999 Chev Classic PU, it was a late 1998 production labeled a 99 even though the chassis is the same as the 98. Will the trailer hitch receiver for the 98 fit it?
asked by: RL G
Expert Reply:
The Draw-Tite Class III 2 Inch Hitch, part # 75099, will fit the 1988 to 2000 Chevrolet and GMC C/K Series Trucks. So, it will fit a 1998 and 1999 Chevrolet Classic truck.
Some other items you may need to complete your towing setup are listed below.
Draw-Tite Ball Mount, part # 2753
Pin And Clip, part # PC3
Tow Ready 2 Inch Hitch Ball, part # 19247, or Tow Ready 1-7/8 Inch Hitch Ball, part # 19260
Tow Ready T-One Wiring Harness, part # 118315
I am including a link to the installation instructions on the Draw-Tite hitch and the Tow Ready wiring harness.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
Draw-Tite Ball Mount for 2" Hitches - 2-3/4" Rise, 4" Drop - 9" Long - 7.5K
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 4 Inch
- Rise - 3 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 8000 lbs WD GTW
- 2 Inch Hitch
- 800 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Hitch for 1997 Chevy K1500 That Wont Interfere w/ The Spare Tire In Any Way
- Q&A: What is the Height of the Side Mounting Brackets for the Curt Class V Trailer Hitch # C15317
- Q&A: Hub and Drum Assembly with Inner Bearing 1.75 ID and Outer Bearing 1.25 ID
- Q&A: What Size Wrench is Needed for a 2" Hitch Ball with 1 Inch Diameter Shank
- Q&A: What Size Wrench is Used to Tighten Curt 2 Inch Trailer Hitch Ball 40038
- Q&A: Will A Trailer Hitch Fit Around the Full Size Spare Tire on a 1997 Chevy C/K Series Pick Up Truck
- Q&A: Correct Replacement Hubs/Drums for Mobile Home Trailer with 25880 Inner and LM67048 Outer Bearing
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Article: My Trailer Hitch Doesn't Fit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Wiring Diagrams
- Article: Best Bike Racks for Electric Bikes
- Article: How to Mount a Truck Bed Camper