What Ladder Racks Will Work With The Utili-Track System On A 2013 Nissan Frontier

Question

Question:

I dont see any options for trucks with the utili-trac installed. I have a 2013 Frontier four door 5foot bed and its hard to accept or believe that I cant use those rails and a rack at the same time. What prevents this from happening? What product would you suggest? I want to mount my 13foot canoe or Thule cargo box on the rack and still use my trac system to secure bikes, firewood, atv, etc.

asked by: James M

1

Helpful Expert Reply:

I am assuming you are referring to a ladder rack for your 2013 Nissan Frontier, if this is the case then we do have several options that work with the factory Utili-Track System.

I recommend using the Erickson Truck Bed Ladder Rack part # EM07705 as this is one of our most popular ladder rack systems. Capable of weight capacities up to 800 lbs The Erickson Ladder rack has bed rail attaches that do not interfere with the Utili-Track's in addition to being adjustable to allow for different load lengths.

expert reply by: Conner L

1

Lisa H.

7/23/2020

Hey there. We are trying to find a rack/bar system for our 2018 Toyota Tundra Crewmax. We have the utility track system so unfortunetly some of the lower cost models I am find state they will not work with the track system. We are hoping to be able to haul two 11.5 ft kayaks.

Reply

Chris R.

7/28/2020

For your 2018 Toyota Tundra Crewmax I highly recommend the Thule TracRac System - either part # TH43002XT-011EX if you have the 8 foot bed or part # TH43002XT-610EX if you have the 6-1/2 foot bed. It's perfectly compatible with the Deck Rail System and features an over-the-cab extension to help with supporting those kayaks.

Reply

Answer 1

I can definitely help you find the correct replacement hub and bearings for your Dexter P-12 SLR axle, but since part of the serial number was unreadable you will need to take a few simple steps to identify which bearings your axle uses. The…

view full answer...

Answer 2

Torque specs for wheel lug nuts will vary depending on the diameter of the lugs, type of lug nut and the wheel's material. The linked chart details the recommended torque for many combinations. Dexter Hub/Drum #84546UC3 has 1/2-inch studs…

view full answer...

Answer 3

Yes, the Thule TracRac SR Sliding Truck Bed Ladder Rack #TH57RV will fit your 2020 Ram 1500 with the 5'7" bed and no Ram box. Unfortunately, this rack is only available in the silver color. We do offer the TruXedo Elevate Truck Bed…

view full answer...

Answer 4

From what I could find, it looks like the plug for a trailer brake controller on your 2023 Nissan Frontier is located in the same location as the 2022 model year. That is behind the side panel by the OBD connector and is likely pushed back into the…

view full answer...

Answer 5

We have not had the opportunity to do a brake controller installation on a 2023 Nissan Frontier yet. But if the plug is located in the same place as the 2022 model year, then the plug will be tucked behind the kick plate located to the left of the…

view full answer...

Answer 6

Hey Brian, the Pace Edwards Full Metal JackRabbit part #PE36CV that you referernced has a 300 lb weight capacity when spread evenly on the cover. The Retrax Pro XR on other hand has a 500 lb capacity.

view full answer...

Answer 7

There isn't going to be any noticeable difference in the fit between the Draw-Tite Trailer Hitch #75549 and Curt Trailer Hitch #C13388 that fit your 2019 Mercedes-Benz Sprinter 2500 with a 170 inch wheelbase and standard bumper. The reason for…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

The Dexter E-Z Flex Suspension Kit part #K71-653-00 will work just fine on 3,500 axles assuming the measurements match up which in your case they do. I have spoken to Dexter about this before and the weight capacity listed is more or less a guide to…

view full answer...

Answer 10

To drop the front of the pin box and thus lower the front of the fifth wheel, you'd need to RAISE the pin box, not lower it. Lowering the pin box would raise the height of the fifth wheel at the front. If you have an available set of holes at the…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

Since you plan on pushing your 2022 Nissan Frontier to the limits I recommend going with the SumoSprings Solo Custom Helper Springs #SS46EV over the kit #SS96EV simple for the higher 1,800 lb rating. It is important to remember though that these are…

view full answer...

What Ladder Racks Will Work With The Utili-Track System On A 2013 Nissan Frontier

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching