Replacement Bearing Kit Recommendation for Spindle with Dimensions of 1.06 and 1.368 inch
Question:
Gentlemen, HELP I just purchased an old 22foot travel trailer and would like to replace all bearings, races and seals. The drum measures 10dia. on the inside. The shaft dia. for the outer bearing is 1.058, the inner is 1.368dia. The seal goes into a 2.50inch dia. pocket The drum says FAYETTE, DAYTON, 9848 and W-3. Which set of your product would be best for this application?
asked by: Tom B
Expert Reply:
Based on the dimensions you gave your trailer has a number 84 spindle which is very common. That means that for a bearing kit you'd need the part # BK2-100.
I attached an install video for this kit for you to check out as well.
Product Page this Question was Asked From
Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing L44649 and L68149
- Race L68111 and L44610
- 3500 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: What is the Best Grease for Trailer Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Timken Bearing Kit Fitment for a 3,500 lb Axle
- Q&A: How to Measure to Determine the Size Trailer Brakes Needed For Hydraulic Drum Replacement
- Q&A: Bearing Kit Recommendation for 84 Spindle K71-717-00
- Q&A: Tips for How to Identify a Trailer Axle
- Q&A: Recommended U-Bolts And Plate For A 1-1/2" Wide Square Axle
- Q&A: Lug Nut Torque Chart for Trailer Wheels