Weight Distribution System Recommendation for 2015 Chevy Traverse
Question:
I have a 2015 chevy traverse that I use to pull a 19ft jay feather camper with a gvw of about 4700 lbs. I would like to get a weight distribution hitch but have no clue what I need. I dont want to spend a ton and would like to be able to back up with it on. Any help would be greatly appreciated
asked by: Lee K
Expert Reply:
The Fastway System part # FA94-00-0600 would be a great choice based on what you said you are looking for. It's tongue weight range is 400-600 lbs which should be just right for your trailer that weighs 4,700 lbs.
If your tongue did end up higher than 600 lbs the part # FA94-00-0800 would be a better option as it has a 600-800 lb tongue weight range.
The best way to pick out a weight distribution system is to base it off of the loaded tongue weight of the setup when it is loaded and ready to tow. This figure also includes the weight of any cargo behind the rear axle of the tow vehicle. I attached a help article on determining tongue weight for you to check out as well. You will want the loaded tongue weight of your setup to fall right in the middle of the tongue weight range of the system you use.
For a 2 inch ball you would want part # A-90 and for a 2-5/16 inch ball # 19286.
![Jameson C](https://images.etrailer.com/static/images/catg/people/371_tn.jpg)
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 8,000 lbs GTW, 800 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 500 lbs
- 600 lbs
- 700 lbs
- Fastway
more information >
Product Page this Question was Asked From
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 6,000 lbs GTW, 600 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 500 lbs
- Fastway
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Determining Trailer Tongue Weight
- Article: 2 Steps for Finding the Right Weight Distribution Hitch Size
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: 5 Tips to Confidently Choose Your Weight Distribution Hitch
- Article: Which Sway Control Hitch is Right For Your Trailer?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Can A Weight Distribution Hitch Be Used Together With An Electronic Sway Control System
- Q&A: Is Etrailer Ball Mount As Good Of Quality As Draw-Tite Or Curt?
- Q&A: Best Weight Distribution System for a R-Pod 171 Trailer
- Q&A: Weight Distribution Hitch For A 2016 R-pod 179 With 300 Lb Tongue Weight And 3800 Lb Trailer Weight
- Q&A: Comparing Fastway e2 Round and Trunnion and Equal-i-zer Trunnion Weight Distribution Systems
- Q&A: Recommended Weight Distribution System for Rpod 179 Travel Trailer
- Q&A: How To Help Fight Trailer Sway On a Forest River Wolf Pup 17JG