Best Trailer Hitch Receiver and Other Parts To Tow a Trailer with a 2016 Toyota Sienna Limited
Question:
Can you tell me the correct tow hitch/s for a 2016 AWD Toyota Sienna Limited? Thank you
asked by: Jennifer H
Expert Reply:
The best trailer hitch receiver for your 2016 Toyota Sienna Limited is the Draw-Tite # 76112. This is my top choice because once it's installed on the van all you see is the receiver opening and safety chain loops. The cross tube is hidden under the van.
If you're going to be towing a trailer you'll also need a wiring harness. The Tekonsha # 118648 will provide you with a 4-way trailer connector at the rear of the van. It plugs into connectors behind both tail lights and also has a wire from the harness to the Sienna's battery.
You'll also need a ball mount and hitch ball. I've attached link of our selection of ball mounts for a 2 inch hitch receiver as well as an article to help you determine the correct rise or drop you may need. Once you choose a ball mount you can then choose a hitch ball to fit it.
One way to make choosing a ball mount easier is to go with an adjustable ball mount like the B&W Tow & Stow # BWTS10038B. It features the ability to be flipped under the hitch when not using it and will provide up to 5-1/2 inches of rise or 5 inches of drop.
For a pin and clip to fit you can use # PC3 or if you'd like to have a locking pin you can use # BX8858.
I've also included links to some articles on towing that you might find helpful.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
B&W Tow & Stow 2-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 7.5K - Black
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Matte Black
- Drop - 5 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class IV
- B and W
more information >
Blue Ox Trailer Hitch Receiver Lock for 2" Hitches
- Trailer Hitch Lock
- Standard Pin Lock
- Keyed Unique
- Fits 2 Inch Hitch
- Flush Pin
- 2-3/4 Inch Span
- Blue Ox
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 525 lbs TW
- 3500 lbs GTW
- 3500 lbs WD GTW
- 2 Inch Hitch
- 525 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Differences Between Curt, Draw-Tite, and etrailer.com Trailer Hitches for 2019 Subaru Outback Wagon
- Q&A: Base Plate and Tow Bar Recommendations for a 2018 Ford Focus Hatchback
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is Ground Clearance for Draw Tite Hitch Installed on 2017 Toyota Sienna
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Towing Capacity of 2017 Toyota Sienna LE with Tow Package
- Article: Which Hitches are Made in the USA
- Q&A: Tongue Weight Rating of 2016 Toyota Sienna When Using the Draw-Tite Max-Frame # 76112 Trailer Hitch
- Article: 5 Things to Know About Weight Distribution Hitches
- Article: Ball Mount Basics: Weight Capacity, Class, and Size