bing tracking image
Q & A Icon

What Size Drill Bit is Used to Mount Reese Sway Control Ball Plate to a Trailer Tongue  

Question:

What size bit do you use to drill the six holes for the little ball mounting plate part # RP58062 that goes on the side of the a frame of the trailer

0

Expert Reply:

To install ball plate # RP58062 you will need to drill 4 holes using an 11/32 (.343) drill bit for 1/8" (.125) or thicker trailer tongue material, or a 9/32" (.281) drill bit for thinner material. Then you will line up the plate with the 4 holes and drill the remaining two holes. I have linked some instructions for you.

expert reply by:
0
Michael H

Products Referenced in This Question



Video/Article/FAQ this Question was Asked From

Article or Video
Q & A Icon

Continue Researching

See More Q&A Expert Answers >>