Trailer Jack Recommendation to Fit Trailer Snap Ring Mount that is 2-1/2 inch
Question:
Im looking for a marine trailer jack to fit the existing welded snap ring mount. Outer diameter of the existing mount appears to be 2.5. Any recommendations?
asked by: John P
Expert Reply:
The hole in the bracket of the Fulton 1200 lb Snap Ring Swivel Jack # FTJ12000101 is 2.55 inches in diameter to accommodate the 2-1/2 inch diameter flange on the trailer mounted bracket that the snap ring attaches to. The 2-1/2 inch diameter flange on the trailer bracket passes through the 2.55 inch diameter hole in the bracket on the jack.
The holes that the retaining swivel pin passes through are 3 inches apart on center.
I have produced a photo of the snap ring bracket included with the above mentioned jack, complete with dimensions. In order for the bracket that is existing on your trailer to work with this jack, the dimensions will need to be identical.
Product Page this Question was Asked From
Fulton Round, Snap-Ring Swivel Marine Jack - Bolt On - Sidewind - 10" Lift - 1,200 lbs
- Trailer Jack
- Boat Trailer
- Leveling Jacks
- Tongue Jacks
- Steel
- 1001 - 2000 lbs
- Sidewind Jack
- Swivel Jack
- 10 Inch Lift
- Bolt-On
- With Wheel
- Fulton
more information >
Featured Help Information
Instructions
Continue Researching
- Search Results: fabric
- Shop: Griot's Garage Fabric Protectant for Vehicles and RVs - 22 fl oz Spray Bottle
- Shop: Valterra RV Protectant - 32 oz Spray Bottle
- Shop: Fulton Round, Snap-Ring Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,200 lbs
- Shop: Dexter Trailer Axle w/ Electric Brakes - E-Z Lube - 6 on 5-1/2 Bolt Pattern - 95" - 5,200 lbs
- Shop: Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Search Results: tj12000101
- Search Results: trailer jack
- Q&A: Recommended Jack For Log Splitter That Mounts To 2-1/2" Swivel Base With Snap Ring
- Shop: CE Smith Roller Bunks for Boat Trailers - 5 Rollers Each - 4' Long - 1,500 lbs - 1 Pair
- Shop: Dutton-Lainson Hand Winch - TUFFPLATE Finish - Single Speed - 12' Strap - 400 lbs
- Video: Review of Fulton Trailer Jack - Side Frame Mount Jack - FTJ120W0301
- Video: etrailer Trailer Jack - Side Frame Mount Jack - MJ-1200B Review
- Video: Dutton-Lainson Trailer Jack - Side Frame Mount Jack - DL22560 Review
- Video: Dutton-Lainson Pull Pin Easy Swivel Trailer Jack Review
- Q&A: Mounting Bracket Dimensions for the Fulton Round Snap-Ring Swivel Marine Jack # FTJ120W0301
- Video: Review of Fulton Trailer Jack - Side Frame Mount Jack - FXP10W0301
- Video: etrailer Trailer Jack - Side Frame Mount Jack - MJ-1500B-DWL Review
- Q&A: Replacement Weld On Jack Recommendation for Boat Trailer
- Search Results: snap ring trailer jack
- Search Results: fulton trailer jack parts
- Q&A: Fulton Magnum Series Jack Recommendation.
- Q&A: Replacement Jack For A Dorsey Boat Trailer
- Search Results: futon
- Q&A: Replacement Idler Hub For Old Boat Trailer With DICO 45264 Idler Hubs
- Q&A: Will the CE Smith Roller-Style Guide-Ons Fit an EZ Loader Boat Trailer with 4 Inch Tall Frame
- Article: Where to Position the Trailer Axle?
- Article: Trailer Wiring Diagrams
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: How to Measure for Trailer Hitch Drop