Inno Velo Gripper Bike Rack for Truck Beds - C-Channel Mount Compatibility With Nissan Utili-Track

Question

Question:

Why wont it work with Utli track in 2016 Nissan Frontier?

asked by: Jim

0

Expert Reply:

For your 2016 Nissan Frontier with the Utili-Track system the Inno Velo Gripper # INRT202 is compatible. It comes with the hardware to install directly into the Utili-Track C-Channels. For this product C-Channel and Utili-Track are the same.

expert reply by: Jason S

0

Answer 1

The Inno Velo Gripper Bike Rack for Truck Beds, part #INRT202 is designed for trucks just like your 2012 Frontier. I have attached a photo of the #INRT202 for you. The small square plate( pointed out with an arrow in the photo) attached to the eye…

view full answer...

Answer 2

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

I do have a solution for you but there have actually never been any custom towing mirrors made for a Nissan Frontier and so I would be surprised if any ever come out for your 2019 Nissan Frontier. Since this is the case I recommend using the K-Source…

view full answer...

Answer 6

For your 2024 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. I like the Liberty because it is simple, reliable, and looks great in any vehicle. The main unit installs behind the dash, so only the control knob will…

view full answer...

Answer 7

On the Nissan Frontier and other Nissan vehicles, if the vehicle did not come with a factory tow package it will not have a functioning wiring harness even if one, like #118263, is added. There will be relays that will need to be inserted to make the…

view full answer...

Answer 8

The relay location on Nissan vehicles can be interesting. A lot of times on the Frontier it's behind the kick panel on the passenger side like where you checked but the other common location is under the dash to the left of the steering wheel…

view full answer...

Answer 9

Yes we do carry the Redarc Tow-Pro Elite Trailer Brake Controller #RED44FR. Use Plug-and-Play Wiring Harness #RED39FR to install the brake controller on your 2017 Nissan Frontier. This is a simple plug-in installation process, just find the…

view full answer...

Answer 10

I recommend using the Air Lift LoadLifter 5000 Air Helper Springs #AL39DQ on your 2023 Nissan Frontier 4x4. These springs allow you to adjust the air pressure in the springs to give your suspension the support it needs to reduce sag. When you are not…

view full answer...

Answer 11

From what I could find, it looks like the plug for a trailer brake controller on your 2023 Nissan Frontier is located in the same location as the 2022 model year. That is behind the side panel by the OBD connector and is likely pushed back into the…

view full answer...

Answer 12

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Inno Velo Gripper Bike Rack for Truck Beds - C-Channel Mount Compatibility With Nissan Utili-Track

Product Page this Question was Asked From

Continue Researching