Timbren Jounce Springs And Spacers For Lifted 2016 Ram 1500

Question

Question:

Would this fit on a 2016 Ram 1500 with a 4inch suspension lift kit?

asked by: Tyler

0

Expert Reply:

The Timbren Rear Suspension Enhancement System # TDR1500DQ will work on your 2016 Ram 1500 when you use the correct number of Timbren 1" Spacer For Raised Frame Vehicles # A25723-90AH00. You will need to get longer bolts for this assembly locally when adding the spacers for your lift.

The Aeon hollow rubber springs along with vehicle-specific brackets and hardware make for a simple installation and great function.

expert reply by: Jason S

0

Answer 1

The Timbren kit part #TDR1500DQ does fit your 2012 Ram 1500 and will reduce sag from trailer towing but since you have a lift kit installed you will need to also install spacers to take up the additional space your frame has between it and the rear…

view full answer...

Answer 2

I do have an option for a 2014 Ram 1500 but the SumoSprings Solo Custom Helper Springs part #SSR-307-40 won't do much for a lifted vehicle. Instead, I recommend the Timbren Rear Suspension Enhancement System part #TDR1500DQ which is really the…

view full answer...

Answer 3

I'm impressed you are able to tow a fifth wheel trailer level with a 6 inch lift as normally that makes the truck too tall, but to answer your question the best solution would be a Timbren kit with a 6 inch spacer to make up for the lift space…

view full answer...

Answer 4

We have Timbren Suspension Enhancement for your 2019 Ram 1500 Classic that has a 3 inch lift but you'd need to use the Timbren kit part #TDRTT1500 with the 3 of the 1 inch spacers like #A25723-90AH00 for each side. There isn't an air bag kit…

view full answer...

Answer 5

Yes, you can still use the Timbren Rear Suspension Enhancement System part #TDR1500DQ on your lifted 2014 Ram 1500 you just need to add the Timbren 1" Spacer For Raised Frame Vehicles part #TA25723-90AD00 to compensate for the lift. This spacer…

view full answer...

Answer 6

You can use the SumoSprings Solo Custom Helper Springs #SSR-307-40 on your 2017 Ram 1500 with a 4" lift but you may need some spacers to get the maximum performance out of these springs. The total stack size of these springs and mounting…

view full answer...

Answer 7

You can install suspension enhancement on your 2016 Ram 1500 that has a 6 inch lift like the Air Lift LoadLifter 5000 Air Helper Springs #AL57365 (this is correct kit for your truck) but you do need the correct size spacer like you mentioned. The…

view full answer...

Answer 8

The Air Lift LoadLifter 5000 Ultimate Air Helper Springs #AL88365 that you referenced are confirmed to fit your 2012 Ram 1500 but whether or not you need to add some spacers will depend on what exact kind of 5 inch lift you have. If the lift on your…

view full answer...

Answer 9

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 10

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 11

If you are considering Timbrens like the #TDR1500DQ and the SumoSprings like the #SSR-307-47 for your 2022 Ram 1500 4x4, I recommend the SumoSprings #SSR-307-47. The SumoSprings will offer the same quality as the Timbrens in terms of suspension…

view full answer...

Answer 12

There's not many differences between the Air Lift WirelessONE item #AL25980EZ and item #AL25980. The main difference is that the item #AL25980EZ has a slightly higher CFM at 1.03 compared to 0.92 and it runs slightly more efficient at 9% over 15%…

view full answer...