Does The Draw-Tite Class III Hitch # 75699 Fit Under The Bumper On A 2011 Jeep Grand Cherokee
Question:
Does the draw tite hitch fit under the bumper or does the bumper have to be cut out?
asked by: Carl F
Expert Reply:
The Draw-Tite Class III 2 Inch Hitch, part # 75699, will install under the bumper on your 2011 Jeep Grand Cherokee. I am including a picture to the right that will show the proper position of the hitch on a Jeep Grand Cherokee.
Also, I am including a link to the installation instructions for the Draw-Tite hitch.
If you will be towing with this hitch you will want to check your owners manual or the Jeep dealer for the towing capacity of your 2010 Jeep Grand Cherokee.
To complete your towing setup, you will need the following items:
Curt Ball Mount, part #C45010
Pin and Clip, part # PC3
Tow Ready 2 Inch Hitch Ball, part # 19247, or Tow Ready 1-7/8 Inch Hitch Ball, part # 19260
Tow Ready T-One Wiring Harness, part # 118425, or with tow package use Tow Ready Wiring, part # 118384
I am including links to the installation instructions on both wiring harnesses.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
1-7/8" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 2,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 1-7/8 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 2000 lbs GTW
- Class III
- Draw-Tite
more information >
2" Hitch Ball - 1" Diameter x 2-1/8" Long Shank - Chrome - 7,500 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-1/8 Inch Shank Length
- 1 Inch Diameter Shank
- 7500 lbs GTW
- Class III
- Tow Ready
more information >
Curt Ball Mount for 2" Hitches - 3/4" Rise, 2" Drop - 8-1/4" Long - 7,500 lbs
- Trailer Hitch Ball Mount
- Fixed Ball Mount
- No Ball
- 1 Inch Ball Hole Diameter
- Steel Shank - Gloss Black
- Drop - 2 Inch
- Rise - 1 Inch
- Fits 2 Inch Hitch
- 7500 lbs GTW
- Class III
- CURT
more information >
Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-1/4" Span
- Hitch Pins and Clips
- Standard Hitch Pin
- Fits 2 Inch Hitch
- Fits 2-1/2 Inch Hitch
- 5/8 Inch Diameter
- 4 Inch Span
- Draw-Tite
more information >
Product Page this Question was Asked From
Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 500 lbs TW
- 5000 lbs GTW
- 7500 lbs WD GTW
- 2 Inch Hitch
- 750 lbs WD TW
- Concealed Cross Tube
- Draw-Tite
more information >
Featured Help Information
Instructions
Continue Researching
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Will EcoHitch Interfere With Kick Sensor and Allow for Larger Spare on 2021 Toyota Highlander
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Does The Curt SecureLatch Lunette Ring CU49FR Come With Hardware? What Kind Of Bolts?
- Q&A: Size of Factory Bolts For Installation of Curt Trailer Hitch Receiver in Factory Weldnuts
- Q&A: Install Pictures for the Curt Hitch part # C13065 on a 2014 Jeep Grand Cherokee
- Q&A: Trailer Hitch That Fits 2020 Jeep Grand Cherokee Limited X
- Q&A: Torque Specs for the Class III Draw-Tite Max-Frame Trailer Hitch on a 2011 Jeep Grand Cherokee
- Q&A: What Wires on 7-Way Need to be Connected to use Curt Echo Brake Controller
- Article: How to Measure for Trailer Hitch Drop
- Article: Trailer Wiring Diagrams
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Brake Controller Installation: Starting from Scratch
- Article: Trailer Hitch Installation Tips