Converting Drum Brakes to Disc Brakes on a Trailer With Triple 7,000 lb Axles
Question:
We have a 2014 Kaufman Mini 5 with 3 7,000 lb. e-z lube axles. We want to convert to disc brakes, so we need 3 sets. Is this the right part?
asked by: Xaver G
Expert Reply:
The Kodiak Disc Brake Kit, part # K2HR712, that you referenced will fit axles that are rated for 7,000 lbs that use a #42 spindle. It will work with 16 inch and larger wheels that use an 8 on 6-1/2 bolt pattern. Since axles can vary depending on the manufacturer, as long as your current spindle is a #42 and/or uses the correct bearing, races, and seals, then these disc brakes will be the perfect upgrade for you. The correct bearings, races, and seals are as follows:
Bearings (sold separately)
Inner bearing: 25580
Outer bearing: 14125A
Races (included)
Inner race: 25520
Outer race: 14276
Seal: RG06-070 (sold separately)
Inner diameter: 2.250 inches
Outer diameter: 3.376 inches
If these are the disc brakes that you will need, then you will need the Bearing Kit, part # BK3-200, which will give you the correct bearings and seals that you need.
Since you have the EZ Lube spindles on your axles, you can use the Grease Caps, part # RG04-120, if your current grease caps are not compatible with the disc brakes.
Products Referenced in This Question
Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 14125A and 25580
- Race 25520 and 14276
- 7000 lbs Axle
- etrailer
more information >
Grease Cap, 2.72" OD Drive In with Plug - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- E-Z Lube Grease Cap
- 2.717 Inch O.D.
- Redline
more information >
Product Page this Question was Asked From
Kodiak Disc Brake Kit - 13" Hub/Rotor - 8 on 6-1/2 - Raw Finish - 7,000 lbs
- Accessories and Parts
- Trailer Brakes
- Disc Brakes
- LH
- RH
- 7000 lbs
- Brake Assembly
- 8 on 6-1/2
- Hub and Rotor Assembly
- Kodiak
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Replacement Trailer Hub Bearing - L68149
- Shop: Grease Seal
- Shop: etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity
- Shop: Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Q&A: Recommended Replacement For Napa Trailer Grease Seal 16667
- Q&A: How to Measure to Get a Replacement Trailer Hub Grease Seal
- Q&A: Determining The Correct Bearings And Seals For A 2007 EZ LOADER Boat Trailer
- Search Results: seal~cross~reference
- Search Results: hub and bearing
- Search Results: seals
- Search Results: seals for trailer bearings
- Search Results: hubs
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 2-1/4" Long Shackle Straps
- Shop: Redarc Tow-Pro Elite Brake Controller - Dash Knob - 2 Braking Modes - 1 to 3 Axles - Proportional
- Shop: etrailer Rust-Resistant 4-Leaf Double Eye Spring for 4K Trailer Axles - 26" Long - Dacromet
- Video: Redline Trailer Suspension - Leaf Spring Suspension - 30-20 Review
- Search Results: spring hanger spacing
- Search Results: axle to spring mounts
- Q&A: Differences in the Redline Single-Axle Trailer Hanger Kits, # APS1, #APS2, and # APS3
- Q&A: Determining Spring Hanger Spacing When Installing 4-Leaf Double-Eye Spring # PR4B
- Q&A: Can Trailer Suspension Hangers Be Bolted on
- Q&A: Upgraded 26 Inch Leaf Springs For 3,500 lb Axle on Tracker Boat Trailer
- Article: Parts Needed to Add Hydraulic Disc Brakes to a Trailer
- Video: Review of Hydrastar Trailer Brakes - Tandem Axle Disc Brake Kit - HSE7K-T1SO
- Video: Review of MORryde Trailer Leaf Spring Suspension - Spring Mounting Hardware - MR46ZR
- Video: etrailer Trailer Brakes - Hydraulic Drum Brakes - AKFBBRK-7-D Review
- Article: Trailer Wiring Diagrams
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Video: Trailer Brakes and Wiring Installation