Mounting Hardware for Thule Ski Rack on 2017 Toyota 4Runner with Factory Crossbars

Question

Question:

I have a thule ski roof rack, but with a square bar set up. Do you have a conversion foot mount that can fit my 2017 Toyota 4Runner oval cross bars? Universal mount? I can send pics

asked by: Moses

0

Expert Reply:

The mounting kit you need for your ski rack on your 2017 Toyota 4Runner's factory cross bars is # TH7520970001. I confirmed with Thule that these will fit.

expert reply by: Charles S

0

Answer 1

There is a replacement bracket that will work for your Thule Flat Top Ski and Snowboard Carrier TH91725. You will need the Replacement Bottom Mounting Clamp #753-2854 which is a confirmed fit for that ski carrier. I have added a photo with dimensions…

view full answer...

Answer 2

Thank you for the information and the photos! According to what you sent in it looks like you have one of the discontinued Thule Flat Top (TH91724 or TH91725) or Pull Top (TH91726) carriers. These came with universal mounting hardware as well as an…

view full answer...

Answer 3

It looks like you have the older Thule Flat Top Ski Carrier and in which case you can purchase the Mounting Kit for Thule Flat Top Rooftop Ski and Snowboard Racks part #7533998 to mount them onto factory aero crossbars. This kit will replace the…

view full answer...

Answer 4

The Scissor Jack Stabilizers part #TJSCHD-24-4 that you referenced would be a great set of 4 stabilizers that would work well on your 2016 Sunseeker 3170DS. These are easy to use and have 10,000 lbs of stabilizing capacity so they would work well on…

view full answer...

Answer 5

That looks like an older Thule Flat Top ski rack. For a mounting hardware kit that allows it to fit newer style roof racks we have the #7533998 which will work on your 2017 Subaru Outback.

view full answer...

Answer 6

I reached out to Thule and found that the difference between the Replacement 20 mm SpeedLink Mounting Hardware Assembly for Thule SnowPack Ski and Snowboard Carrier #7521241002 and the 13 mm #7521241001 is the length of that center bolt/screw. You…

view full answer...

Answer 7

To mount your Thule Flat Top Ski Carrier 724, you will want to use the Thule Universal Mounting Kit #7533998. These mounting feet are designed to fit most factory and aftermarket crossbars. I spoke with my contact at Thule and she confirmed that…

view full answer...

Answer 8

The correct Replacement SpeedLink Mounting Hardware Assembly for your Thule SnowPack Extender Ski and Snowboard Carrier #TH7325 (TH92726) is the Replacement 13 mm SpeedLink Mounting Hardware Assembly #7521241001. I was able to verify this with the…

view full answer...

Answer 9

To mount the Thule 726 Pull Top Ski Carrier you will want the Mounting Kit for Thule Pull Top Rooftop Ski and Snowboard Racks item #TH7520970001. This mounting kit can fit crossbars up to 3-1/8 inches in width.

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Yep, you can absolutely just upgrade the 800 lb trunnion bars to 1,200 lb bars on your Reese Strait-Line weight distribution hitch and not have to get any parts. All you will need are two of the following: - Replacement Trunnion Spring Bar for Reese…

view full answer...