Weight Distribution Recommendation For 2016 Shasta Flyte 265DB Trailer
Question:
Hi, My current tow vehicle is a 2017 Ram 1500 4x4 Quad Cab with 5.7 Hemi engine 8 speeds transmisison with tow package. My travel trailer is a 2016 Shashta Forest-River Flyte 265DB. Unloaded Vehicle Weight is 5253lbs and Hitch Weight is 589lbs. I have been looking at the following two models. Models: PS49582 and PS49583. Any sugestion would be appreciated. Thank you
asked by: Vincent
Expert Reply:
For your application on your 2016 Shasta Forest River Flyte 265DB, I recommend using the Pro Series RB3 Weight Distribution System with Shank - Round Bar - 10,000 lbs GTW, 1,000 lbs TW # PS49583 over the # PS49582. With your fully loaded trailer an any cargo in the bed of your Ram truck behind the rear axle, I think you'd be right towards the top of your limit with the smaller system and the larger system can be adjusted as needed for lighter loads.
This system does require a hitch ball, like # A-90 for 2 inch or # 19286 for a 2-5/16 inch hitch ball.
I recommend getting two of the Reese Friction Sway Control Kit - Economy # 83660 friction sway bars for this application because it is a 29 foot 11 inch long trailer and it is recommended to use two if the trailer is 26 feet or longer. I've attached an article to help.
If you want a system with built in sway control, I recommend the Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW # C17500. This system comes with the 2-5/16 inch hitch ball and all the hardware needed.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
Reese Friction Sway Control Kit - Economy - by Draw-Tite, Reese and Hidden Hitch
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- Reese
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Curt TruTrack Weight Distribution System w/ Sway Control - Trunnion - 10,000 lbs GTW, 1,000 lbs TW
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Includes Shank
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 900 lbs
- CURT
more information >