How Do Fenders # HP36VR Mount to Trailer Usually
Question:
Which fender mounts do you recommend for the f9x32-1rwb fenders or do they have to welded instead of brackets?
asked by: Darren
0
Expert Reply:
Ideally you would weld on the fenders part # HP36VR since they have a backing plate. The L-brackets like the part # CE26098G-2 could be made to work but it wouldn't be the cleanest way to install the fender.
expert reply by:
Jameson C
0
click to enlarge
Products Referenced in This Question
Single Axle Trailer Fender w/ Backing Plate - Steel - 14" to 15" Wheels - Qty 1
- Trailer Fenders
- No Step
- 14 Inch Wheels
- 15 Inch Wheels
- 9 Inch Wide
- 32 Inch Long
- Steel
- Bolt-On
- Weld-On
- For Single-Axle Trailers
- etrailer
more information >
Product Page this Question was Asked From
Mounting Brackets for Trailer Fender - 13"/14"/15" Wheels - Galvanized Steel - Qty 2
- Accessories and Parts
- Trailer Fenders
- Mounting Hardware
- 6-1/2 Inch Wide
- Brackets
- 8-1/4 Inch Tall
- 13 Inch Wheels
- 14 Inch Wheels
- 15 Inch Wheels
- CE Smith
more information >
Continue Researching
- Article: Trailer Tire Sizing
- Q&A: Can 8 Inch Trailer Tires be Replaced with 12 Inch Trailer Tires
- Article: How to Measure for Trailer Hitch Drop
- Q&A: How to Determine Proper Spacing Between Tire and Fender for Clearance on 3000 LB Trailer
- Q&A: Mounting Brackets for CE Smith Single Axle Trailer Fenders
- Q&A: Boat Fender Replacement Recommendation for Black Fender and 13" Wheels
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Need New Tires for a Trailer Hauling 2,500 to 2,800 lbs with 4.80 x 12 Tires
- Q&A: Brackets to Mount CE Smith Trailer Fenders
- Q&A: Recommended Mounting Brackets For CE Smith Single Axle Trailer Fenders w/ Top and Side Steps
- Article: Trailer Wiring Diagrams
- Article: How to Wire an Electric Winch
- Article: Brake Controller Installation: Starting from Scratch
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs